INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
The system is OK.
The motorcycle can be ridden.
This check is most reliable if performed with
a warmed-up engine.
The neutral switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The clutch switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
YES
NO
YES
NO
YES
NO
NOTE:
5YS10.book Page 17 Wednesday, May 14, 2003 6:32 PM
Содержание V-Star XVS1100S
Страница 1: ...5YS 28199 10 LIT 11626 17 24 XVS1100S C XVS1100AS C XVS1100ATS C OWNER S MANUAL...
Страница 2: ...EAU10041 5YS10 book Page 1 Wednesday May 14 2003 6 32 PM...
Страница 94: ...CONSUMER INFORMATION 9 8 9 5YS10 book Page 8 Wednesday May 14 2003 6 32 PM...
Страница 99: ...PRINTED IN JAPAN 2003 05 3 3 2 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD...