Yamaha Tyros4, Руководство по обслуживанию

Страница: 101 / 173

101
Tyros4
FORMATTING HDD
1. While holding down the [F] button and [J] button, turn on the
power switch.
2. The device information indication mode will be started and
the following screen will be shown.
=======================
Device Information
=======================
[ A ] : USB Storage
[ B ] : Expansion Module
[ C ] : Internal HDD
Press [EXIT] to quit.
3. Press the [C] button to go to the internal HDD information
indication screen. If unformatted, “UNFORMAT DISK” will
be shown.
=======================
Internal HDD Information
=======================
UNFORMAT DISK
Press [DEMO] to format.
Press [EXIT] to quit.
Even for an internal HDD formatted on another Tyros4
information will be displayed, but the “Volume Name” will
be empty or another name than “_TYROS4HDD_” will be
indicated.
=======================
Internal HDD Information
=======================
Vender ID : I-O DATA
Product ID : HDPN-U
Revision : 9.60
Capacity : 232.75 [GB]
Serial ID : Exist
Volume Name :
R/W test :
Press [START/STOP] to test.
Press [DEMO] to format.
Press [EXIT] to quit.
4. Press the [DEMO] button to execute formatting. “Formatting
…” will be indicated during formatting procedure.
5. Information of the internal HDD will be shown when the
formatting is completed. The formatting is executed normally
if “_TYROS4HDD_” is shown in the “Volume Name”
fi eld.
(If an error occurrs, only error message will be indicated.
Refer to the error message list at the end of this section.)
=======================
Internal HDD Information
=======================
Vender ID : I-O DATA
Product ID : HDPN-U
Revision : 9.60
Capacity : 232.75 [GB]
Serial ID : Exist
Volume Name : ̲TYROS4HDD̲
R/W test :
Press [START/STOP] to test.
Press [DEMO] to format.
Press [EXIT] to quit.
(Example)
6. Press the [START/STOP] button to start Read/Write test. A
countdown indication from 10 to 1 will appear in the R/W
test
fi eld as the checking is executed. Countdown indication
from 10 to 1 will appear three times as three types of
checking is executed.
7. When the Read/Write test is completed successfully, “OK”
will be shown in the R/W test fi eld. “NG” will be shown if
an error is detected.
=======================
Internal HDD Information
=======================
Vender ID : I-O DATA
Product ID : HDPN-U
Revision : 9.60
Capacity : 232.75 [GB]
Serial ID : Exist
Volume Name : ̲TYROS4HDD̲
R/W test : OK
Press [START/STOP] to test.
Press [DEMO] to format.
Press [EXIT] to quit.
(Example)
8. When the “OK” is displayed in the Read/Write test, the
checking is fi nished. Turn off the power switch.
• Error messages list
· Unformatted “UNFORMAT DISK”
· Device error “DEVICE ERROR”
· HDD unrecognized “NO DEVICE”