Tyros4 Owner’s Manual
89
9
M
ixing Console
– Editi
ng the V
o
lume and
To
nal Balance
–
Saving Master Compressor Settings
The Master Compressor settings you have edited on page 88 can be saved as the User Compressor type.
1
Press the [I] (SAVE) button to enter the USER MASTER COM-
PRESSOR display.
2
Select the destination to which the User Master compressor is
to be stored, by using the [3
]–[6
] buttons.
3
Press the [I] (SAVE) button to open the SAVE display.
4
Enter the name of the edited Compressor type (page 31), then
press the [8
] (OK) button.
5
Press the [EXIT] button to return to the previous display.
The saved Compressor type is shown in the TYPE selection at the bottom left of
the display.
2
3
1
Advanced Features
Refer to the Reference Manual on the website,
Chapter 9.
Editing VOL/VOICE parameters:
MIXING CONSOLE display
TAB [
][
] VOL/VOICE
Editing FILTER parameters:
MIXING CONSOLE display
TAB [
][
] FILTER
Editing TUNE parameters:
MIXING CONSOLE display
TAB [
][
] TUNE
Changing an Effect type:
MIXING CONSOLE display
TAB [
][
] EFFECT
[F] TYPE
Editing EQ parameters:
MIXING CONSOLE display
TAB [
][
] EQ
LINE OUT Settings:
MIXING CONSOLE display
TAB [
][
] LINE OUT
