Reference
130
TYROS Owner’s Manual
128
Quick Guide on page 46
Using a Microphone
Connect a microphone to the TYROS and take advantage of the following features:
●
Song Score and Lyrics display (pages 88, 90)
— for ease in following along with a song.
●
— for practicing your singing and learning the proper pitches.
●
— for automatically adding harmony vocals to your voice.
●
— for instantly changing the microphone settings, for making announcements between songs.
You can also apply DSP effects to your voice or make other microphone-related settings from the Mixing Console
display (page 134).
Vocal Harmony Edit
This section explains briefly how to create your own Vocal Harmony types, and lists the detailed parameters for editing. Up to
ten Vocal Harmony types can be created and saved. For basic instructions on using Vocal Harmony, refer to the “Quick Guide.”
Vocal Harmony Edit parameters
VOCODER TYPE
Determines how the harmony notes are applied to the microphone sound when the
Harmony mode (page 133) is set to “VOCODER.”
CHORDAL TYPE
Determines how the harmony notes are applied to the microphone sound when the
Harmony mode (page 133) is set to “CHORDAL.”
FADE
IN / OUT
MAX
INPUT VOLUME
TALK
EFFECT
VOCAL
HARMONY
MIC
SETTING
VH TYPE
SELECT
MIC
MIN
OVER
SIGNAL
MIC / LINE IN
Make sure to adjust the INPUT VOLUME so that the SIGNAL
lamp lights but the OVER lamp does not.
This turns the Vocal Harmony effect on or off. If you connect a microphone to
the TYROS, you can sing along with the song or style and have vocal har-
mony parts added automatically.
This calls up the Microphone setting display
and lets you adjust the level of the microphone
and vocal harmony effect.
This calls up the Vocal Harmony Type selection display
and lets you not only select the desired harmony type
but also edit/create your original Vocal Harmony type.
Determines the on/off setting of the effect applied to the
microphone, set in the Mixing Console display.
This convenient function lets you temporarily cancel the vocal har-
mony or other microphone effects when using a connected micro-
phone. This is especially useful when you talk between songs during
a performance.
VH TYPE
SELECT
2
3
5
4
1
Press the [VH TYPE
SELECT] button.
Press the [EDIT]
LCD button.
Select the desired
parameter to be edited
and adjust the value.
(Refer to the list below.)
Select the desired Vocal
Harmony type in the same
way as done in the Open/
Save display.
Select a Vocal Harmony
type to be edited.
Save the edited Vocal Har-
mony type to the User
drive.
The settings here will be
lost if you change to
another Vocal Harmony
type or you turn the power
off without executing the
save operation.
Содержание TYROS
Страница 1: ......