Reference
134
TYROS Owner’s Manual
132
Mixing Console
There are many components that make up the overall sound of the TYROS. These include MIDI sequence data from
the songs, styles, and Multi Pads, and audio input from a microphone, as well as the various parts of your keyboard
performance. The Mixing Console gives you control over the volume and pan settings of each of these components
— and some other settings as well — letting you fine-tune the overall sound of the TYROS.
If necessary, store the settings from the Mixing Console display.
Basic instructions on saving the settings are given below, and brief explanations of the parameters are on the next
page. For details on the parameters, refer to the separate Data List booklet.
• The settings of the keyboard parts, Style part, Maulti Pad part, and Microphone sound part can be memo-
rized to the Registration Memory (page 51).
• The settings of the Song part can be saved as a song to the User or Disk drive. After setting, call up the
CHANNEL display of the Song Creator, press the [EXECUTE] LCD button on this display to reflect the
settings to the song data on RAM, then save the song to the User or Disk drive (page 55).
Parts making up the TYROS sound
LEFT
LEFT HOLD
RIGHT1
RIGHT2
RIGHT3
PART ON / OFF
PART SELECT
UPPER
LOWER
CHANNEL
ON / OFF
PART
MULTI PAD CONTROL
●
Keyboard parts
Consists of RIGHT1, RIGHT2, RIGHT3, LEFT.
Split Point (page 112)
●
Multi Pad parts
Consists of Multi Pads 1, 2, 3, and 4
●
Microphone sound part
●
Style parts
Consists of Rhythm 1, 2, Bass, Chord1, 2, Pad,
Phrase 1, 2
●
Song parts
Consists of 1 - 16 channels.
Basic Procedure (Mixing Console)
A
B
C
D
E
F
G
H
I
J
1
4
4
5
3
2
MIXING
CONSOLE
BALANCE
CHANNEL
ON / OFF
PART
PART
Press the [MIXING
CONSOLE] button to
call up the Mixing
Console display.
Use the [BACK]/[NEXT] buttons
to call up the desired page.
Set each parameter.
Quick Guide
on pages 36,
37, and 45
Press the [MIXING CON-
SOLE] button several times
until the desired parts are
displayed.
Pressing the [MIXING CON-
SOLE] button alternates
among the displays as listed
below.
Select the
row at which
the desired
parameters
are located by
pressing the
correspond-
ing LCD but-
ton.
Part Settings
(page 135)
Line Out Settings (page 140)
Part Settings (page 135), Equalizer (page 139)
Part Settings (page 135), Effects (page 136)
All parts
Style channels
Song channels 1-8
Song channels 9-16
The available displays above
may differ depending on the
page you selected in step #2.
6
Содержание TYROS
Страница 1: ......