6-39
PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
3
4
5
6
7
8
9
EAU03519
Rear wheel
To remove the rear wheel
EW000122
w
8
It is advisable to have a
Yamaha dealer service the
wheel.
8
Securely support the motorcy-
cle so that there is no danger
of it falling over.
1. Loosen the axle nut.
1.
Axle nut
2.
Chain adjusting plate
3.
Brake adjusting nut
4.
Brake rod
2
1
a
3
4
EAU03518
To install the front wheel
1. Install the speedometer gear unit
into the wheel hub so that the
projections mesh with the slots.
2. Lift the wheel up between the
fork legs.
NOTE:
Make sure that there is enough
space between the brake pads
before inserting the brake disc and
that the slot in the speedometer gear
unit fits over the retainer on the fork
leg.
3. Insert the wheel axle, and then
install the axle nut.
4. Lower the front wheel so that it is
on the ground.
5. Tighten the axle nut to the speci-
fied torque.
6. Connect the speedometer cable.
Tightening torque:
Axle nut:
90 Nm (9.0 m·kg)
5EK-9-E2 (TW125)<3.3Passport> 5/23/00 9:47 AM Page 68