background image

 

PERIODIC MAINTENANCE AND ADJUSTMENT

 

7-25

 

1

2

3

4

5

6

7

8

9

 

EAU23283

 

Checking the steering 

 

Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as fol-
lows at the intervals specified in the pe-
riodic maintenance and lubrication
chart.

1. Place a stand under the engine to

raise the front wheel off the
ground. (See page 7-31 for more
information.) 

 

WARNING! To

avoid injury, securely support
the vehicle so there is no danger
of it falling over.

 

[EWA10751]

 

 

2. Hold the lower ends of the front

fork legs and try to move them for-
ward and backward. If any free
play can be felt, have a Yamaha
dealer check or repair the steering.

 

EAU23290

 

Checking the wheel bearings 

 

The front and rear wheel bearings must
be checked at the intervals specified in
the periodic maintenance and lubrica-
tion chart. If there is play in the wheel
hub or if the wheel does not turn
smoothly, have a Yamaha dealer check
the wheel bearings.

✧✷✿✬✥✳ ✥   

ProCarManuals.com

Содержание TT250RZ

























































































Отзывы: