Yamaha TT-R230X 2007 Скачать руководство пользователя

Страница: 23 / 79

3-5

INSTRUMENT

INSTRUMENT AND CONTROL

AND CONTROL

AND CONTROL FUNCTIONS

FUNCTIONS

Fuel tank breather hose

1. Fuel tank breather hose

Before operating the motorcycle:

Check the fuel tank breather hose
connection.

Check the fuel tank breather hose
for cracks or damage, and replace
it if damaged.

Make sure that the end of the fuel
tank breather hose is not blocked,
and clean it if necessary.

Fuel cock

The fuel cock supplies fuel from the tank
to the carburetor while filtering it also.
The fuel cock has three positions:

OFF

RES

FUEL

OFF

1. Arrow mark positioned over “OFF”

With the lever in this position, fuel will
not flow. Always return the lever to this
position when the engine is not running.

FUEL

RES

OFF

1. Arrow mark positioned over “ON”

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

Содержание TT-R230X 2007
















































































Результаты поиска

Содержание TT-R230X 2007

Отзывы:

Похожие инструкции для TT-R230X 2007

Бренды по названию

Популярные бренды

Yamaha TT-R230X 2007, Руководство пользователя

Результаты поиска

Содержание TT-R230X 2007

Отзывы:

Похожие инструкции для TT-R230X 2007

Бренды по названию

Популярные бренды