Yamaha tmax XP500A, Руководство по обслуживанию

Страница: 522 / 559

8 - 44
– +
ELEC
SIGNALING SYSTEM
EAS00799
3. The turn signal light, turn signal indicator
light or both fail to blink.
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
1. Turn signal light bulb and socket
• Check the turn signal light bulb and socket
for continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.
• Are the turn signal light bulb and socket
OK?
Replace the turn sig-
nal light bulb, socket
or both.
2. Turn signal indicator light bulb and socket
• Check the turn signal indicator light bulb
and socket for continuity.
Refer to “CHECKING THE BULBS AND
BULB SOCKETS”.
• Are the turn signal indicator light bulb and
socket OK?
Replace the turn sig-
nal indicator light
bulb, socket or both.
3. Turn signal switch
• Check the turn signal switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the turn signal switch OK?
Replace the left han-
dlebar switch.
4. Hazard switch
• Check the hazard switch for continuity.
Refer to “CHECKING THE SWITCHES”.
• Is the hazard switch OK?
Replace the right
handlebar switch.
5. Voltage
• Connect the pocket tester (DC 20 V) to the
turn signal/hazard relay coupler (wire har-
ness side) as shown.
Positive tester probe
→
brown
1
Negative tester probe
→
ground
• Set the main switch to “ON”.
• Measure the voltage (DC 12 V) on brown
1
at the turn signal/hazard relay coupler
(wire harness side).
• Is the voltage within specification?
The wiring circuit
from the main switch
to the turn signal/
hazard relay coupler
is faulty and must be
repaired.