Yamaha TF1, Руководство по обслуживанию

Страница: 157 / 372

TF5/TF3/TF1
157
7-16-2. HAAD34_MAX (INPUT)
[Contents]
The signals inputted into INPUT17-32 are outputted to
OMNI OUT 1-16.
The HA GAIN setting at that time is +66dB.
The concrete setup is as follows.
INPUT HA GAIN OUTPUT
INPUT17 +66dB
g
OMNI OUT 1
INPUT18 +66dB
g
OMNI OUT 2
: : :
INPUT32 +66dB
g
OMNI OUT16
[Procedure]
Push the
[HAAD34_MAX]
button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD34_MAX ]
INPUT 16 – 32 Max gain setting (+66dB) -> OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC “A. INPUT-OMNI OUT Gain max.”
.
(See page 159.) When measurement is completed, push
[BREAK]
button. Popup dialog is closed and the setup is
canceled.
7-16-3. HAAD12_MIN (INPUT)
[Contents]
The signals inputted into INPUT1-16 are outputted to OMNI
OUT 1-16.
The HA GAIN setting at that time is -6dB.
The concrete setup is as follows.
INPUT HA GAIN OUTPUT
INPUT 1 -6dB
g
OMNI OUT 1
INPUT 2 -6dB
g
OMNI OUT 2
: : :
INPUT16 -6dB
g
OMNI OUT16
[Procedure]
Push the
[HAAD12_MIN]
button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD12_MIN ]
INPUT 1 – 16 Max gain setting ( -6dB) -> OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC “B. INPUT-OMNI OUT Gain min.”
.
(See page 159.) When measurement is completed, push
[BREAK]
button. Popup dialog is closed and the setup is
canceled.
7-16-4. HAAD34_MIN (INPUT)
[Contents]
The signals inputted into INPUT17-32 are outputted to
OMNI OUT 1-16.
The HA GAIN setting at that time is -6dB.
The concrete setup is as follows.
INPUT HA GAIN OUTPUT
INPUT17 -6dB
g
OMNI OUT 1
INPUT18 -6dB
g
OMNI OUT 2
: : :
INPUT32 -6dB
g
OMNI OUT16
[Procedure]
Push the
[HAAD34_MIN]
button in the MEASUREMENT
SETTING screen. TF becomes the setup mentioned above
and the following popup dialog is displayed.
<GUI>
[ HAAD34_MIN ]
INPUT 16 – 32 Max gain setting ( -6dB) -> OMNI 1-16
BREAK
● Take measurements with these settings, according to
TEST SPEC “B. INPUT-OMNI OUT Gain min.”
.
(See page 159.) When measurement is completed, push
[BREAK]
button. Popup dialog is closed and the setup is
canceled.