Toolbar
Reference Manual
TF Series
- 22 -
SLOT SETUP screen (V2.0 and later)
Displays settings and information related to the Tio1608-D I/O Rack that is connected to the
console via the NY64-D that is installed in the expansion slot.
The information that is displayed varies depending on the connection status of the Tio1608-D
and the Quick Config settings.
1
UNIT ID button
Allows you to select the unit ID of the Tio1608-D whose information is displayed.
2
SYSTEM and SYNC indicators
Display the same information as the [SYSTEM] and [SYNC] indicators on the Tio1608-D.
If an error occurs, details are displayed on the UNIT ID button.
3
Quick Config status indicator
Indicates the status of the Tio1608-D's [QUICK CONFIG] switch.
Displayed in gray when turned off, and white when turned on.
Displayed in orange if the Dante settings set by Dante Controller differ from the Quick
Config settings.
4
+48V Master status indicator
Indicates the status of the Tio1608-D's +48V Master button.
Displayed in gray when turned off, and red when turned on.
5
Version information
Displays the version of the Tio1608-D firmware, as well as the Dante firmware contained
in the Tio1608-D.
6
Identify button
Helps you identify the connected Tio1608-D. While this button is being touched, the
LED on the corresponding Tio1608-D flashes.
7
Quick Config button
Turns the console's Quick Config feature on and off.
Displayed in gray when turned off, and white when turned on.
Displayed in orange if the Dante settings set by Dante Controller differ from the Quick
Config settings.
For information about Tio1608-D channel support when using Quick Config, see "Quick
Config Input and input channel relationships" (
8
with OUTPUT checkbox
Determines whether the Tio1608-D OUTPUT ports are connected to the console when
the console is turned on and Quick Config is enabled.
When the checkbox is turned on and if Quick Config is enabled, the Tio1608-D and the
console are patched automatically.
This checkbox can be turned on and off when the Quick Config button is turned off.
NOTE
Quick Config automatically configures essential settings, making it easy to connect a Tio1608-D. It can
automatically configure Dante Network settings and audio signal patching for connections between the
console and up to three Tio1608-D units.
For information about Tio1608-D settings, refer to the documentation for the Tio1608-D.
NOTE
Information and error details for the Tio1608-D are displayed regardless of the state of the console's
Quick Config button.
ձ
ճ
ն
ղ
մ
յ
պ
շ
ո
չ
NOTE
You can use Dante Controller to change Dante patches even when the Quick Config feature is enabled.
However, Quick Config patching will be applied when you restart the console.
If you want to use Dante Controller to change these settings, disable the Quick Config feature.
NOTE
When Quick Config is enabled, only one TF series console on the network can use the Tio1608-D
OUTPUT ports. If one or more other Tio1608-D units on the network have OUTPUT ports used by
another TF series console, the with OUTPUT checkbox turns off automatically and a popup screen is
displayed.
