Perio
d
ic maintenance an
d
a
d
justment
7-25
7
EAU22762
Drive chain slack
The drive chain slack should be
checked before each ride and adjusted
if necessary.
EAU60046
To check the
d
rive chain slack
1. Place the motorcycle on the side-
stand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the
neutral position.
3. Push down on the drive chain un-
der the end of the drive chain
guard.
4. Measure distance A between the
drive chain guard and the center
of the chain as shown.
5. If distance A is incorrect, adjust it
as follows.
NOTICE:
Improper
d
rive chain slack will overloa
d
the en
g
ine as well as other vital
parts of the motorcycle an
d
can
lea
d
to chain slippa
g
e or
b
reak-
a
g
e. If
d
istance A is more than
55.0 mm (2.16 in), the chain can
d
ama
g
e the frame, swin
g
arm,
an
d
other parts. To prevent this
from occurrin
g
, keep the
d
rive
chain slack within the specifie
d
limits.
[ECA23070]
EAU74260
To a
d
just the
d
rive chain slack
Consult a Yamaha dealer before ad-
justing the drive chain slack.
1. Loosen the axle nut and the lock-
nut on each side of the swingarm.
2. To tighten the drive chain, turn the
drive chain slack adjusting bolt on
each side of the swingarm in di-
rection (a). To loosen the drive
chain, turn the adjusting bolt on
each side of the swingarm in di-
rection (b), and then push the rear
wheel forward.
1. Drive chain guide
2. Distance A
Distance A:
43.0–48.0 mm (1.69–1.89 in)
1
2
1. Locknut
2. Axle nut
2
1
UBMB10E0.book Page 25 Monday, August 22, 2022 1:08 PM
Содержание Tenere 700 2023
Страница 112: ...UBMB10E0 book Page 3 Monday August 22 2022 1 08 PM...