Yamaha Tenere 700 2023, Руководство пользователя

Страница: 39 / 114

Instrument an d control functions
4-21
4
3. Install the bleed screws.
4. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
EAUM4121
A d justin g the shock a b sor b er
assem b ly
This shock absorber assembly is
equipped with a spring preload adjust-
er and rebound and compression
damping force adjusters.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Sprin g preloa d
Turn the adjuster in direction (a) to in-
crease the spring preload.
Turn the adjuster in direction (b) to de-
crease the spring preload.
To set the spring preload, turn the ad-
juster in direction (b) until it stops, and
then count the clicks in direction (a).
TIP

When turning the spring preload
adjuster in direction (b), the 0 click
position and the 1 click position
may be the same.

When turning the spring preload
adjuster in direction (a), it may
click beyond the stated specifica-
1. Bleed screw
1
1. Spring preload adjusting knob
Sprin g preloa d settin g :
Unit for adjustment:
Click
Minimum (soft):
0
Standard:
10
Maximum (hard):
24
1
(b)
(a)
UBMB10E0.book Page 21 Monday, August 22, 2022 1:08 PM