Yamaha Tenere 700 2021, Руководство пользователя

Страница: 37 / 112

Instrument an d control functions
4-19
4
EAU45205
A d justin g the front fork
WARNING
EWA10181
Always a d just b oth fork le g s equally,
otherwise poor han d lin g an d loss of
sta b ility may result.
This front fork is equipped with re-
bound damping force adjusting screws
and compression damping force ad-
justing screws.
NOTICE
ECA10102
To avoi d d ama g in g the mechanism,
d o not attempt to turn b eyon d the
maximum or minimum settin g s.
Re b oun d d ampin g force
Turn the adjusting screw in direction (a)
to increase the rebound damping for-
ce.
Turn the adjusting screw in direction (b)
to decrease the rebound damping for-
ce.
To set the rebound damping force, turn
the adjuster in direction (a) until it
stops, and then count the clicks in di-
rection (b).
TIP

When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.

When turning the damping force
adjuster in direction (b), it may
click beyond the stated specifica-
tions, however such adjustments
are ineffective and may damage
the suspension.
Compression d ampin g force
1. Remove the rubber cap by pulling
it out of the front fork leg.
2. Turn the adjusting screw in direc-
tion (a) to increase the compres-
sion damping force. Turn the
adjusting screw in direction (b) to
decrease the compression damp-
ing force. To set the compression
damping force, turn the adjuster in
direction (a) until it stops, and then
count the clicks in direction (b).
1. Rebound damping force adjusting screw
Re b oun d d ampin g settin g :
Minimum (soft):
17 click(s) in direction (b)
Standard:
17 click(s) in direction (b)
Maximum (hard):
0 click(s) in direction (b)
1
(b)
(a)
1. Rubber cap
1
UBHL10E0.book Page 19 Tuesday, October 5, 2021 9:57 AM