SONG MODE
If you are using an external MIDI sequencer
and want the SY77's sequencer to play in
synchronization with it, set this to MIDI so that
MIDI clock messages received at MIDI IN will
determine the tempo.
Recording mode (Real, Step, Pnch): Press Fl,F2
or F3 to select the recording mode.
Realtime recording (press F1): Notes will be
recorded at the exact time you play them.
Step recording (press F2): Notes will be
recorded one by one with the specified time
value, regardless of the actual timing with which
you play.
Punch-in recording (press F3): The same as
realtime recording except that recording will take
place only over the measures specified by
From Meas and To Meas.
Overdub/Replace (Over, Rplc): This determines
how newly recorded data will be added to the
track.
Overdub recording: If you select overdub
recording by pressing F3, notes you record will
added to the data already in the track. The track
will then contain both the old and new data. If
step recording has been selected in overdub
recording will automatically be selected. In
punch record mode, overdub recording can not be
selected.
Replace recording: If you select replace.
recording by pressing F4, notes you record will
replace the data previously in the track. The
track will contain only the new data, and the old
data will be lost. If step recording has been
selected in , replace recording cannot be
selected.
Press F6-F8 to move to the Song Edit Job job
directory, the Song Setup job directory, or to set
the song name.
From Meas (001...999), To Meas (001...999):
If F3 (Pnch) has been pressed to select punch-in
recording, you will be able to specify the range of
measures over which recording will take place.
Recording procedure:
1. If necessary, specify the measure at which
recording will begin, and modify the settings for
time, tempo, quantize, receive channel, click,
click beat, and sync.
2. Specify the recording mode; realtime (F1), step
(F2), or punch-in (F3).
3. If you specified punch-in recording in step 2, set
the beginning (From Meas) and end (To Meas)
of the recorded area.
4. Specify overdub (F3) or replace (F4).
5. Press a memory select button 1-16 to select the
track on which to record. The LED of the
selected track will light red. The LEDs of tracks
which already contain data are lit green.
6. Press RUN and recording will begin. The record-
ing display will depend on the recording mode
selected in step 2. For details see the following
sections; Realtime Recording, Punch-in Record-
ing, and Step Recording.
1. When you are finished recording press STOP and
you will return to the song play display.
Song edit: Any time while in song record mode
(except while recording) you can press EDIT to
edit the song. For details refer to Song Edit
Mode.
SONG RECORD
Realtime recording
Summary: In realtime recording the notes you play
will be recorded in the exact timing with which
you play them
Procedure:
From: song record display
Press: Fl (Real) to select realtime recording
To begin: recording press RUN. The RUN LED
will blink to the tempo.
To stop: recording and return to the song play
display press STOP.
Measure (001...999): As you record this will
advance to show the number of the measure cur-
rently being recorded.
175
Содержание SY-77
