Yamaha SXV70G Скачать руководство пользователя страница 33

Страница: 33 / 96

6-2

age. Consult a Yamaha dealer. Gasohol contain-
ing methanol is not recommended.

●

Make sure that snow or ice does not enter the fuel
tank when refueling.

●

Do not use alcohol deicers or water absorbing
additives with oxygenated fuel.

●

The fuel tank should be filled with straight gaso-
line as specified.

ESU00299

Engine oil

Make sure that there is sufficient oil in the oil tank.

NOTE:

Since the fuel tank cap and oil tank cap look similar, be
careful not to mistake the caps.

ESU00086

Coolant

Check the coolant level in the coolant reservoir when the
engine is cold. If the coolant level is below the
“COLD LEVEL” mark, add soft water until it reaches the
“COLD LEVEL” mark. (See pages 8-11–8-12 for more
details.)

“COLD LEVEL” mark

WARNING

Do not remove the coolant reservoir cap when the
engine is hot.

CAUTION:

●

Hard water or salt water is harmful to the engine
parts. You may use boiled or distilled water, if soft
water is not available.

●

Tap water can be used temporarily in an emer-
gency.

Oil tank capacity: 3.0 L (2.6 Imp qt, 3.2 US qt)
Recommended oil: YAMALUBE 2-cycle oil

U8EK10.book Page 2 Tuesday, June 26, 2001 4:35 PM

Содержание SXV70G

































































































Результаты поиска

Содержание SXV70G

Отзывы:

Бренды по названию

Популярные бренды

Yamaha SXV70G, Руководство пользователя

Результаты поиска

Содержание SXV70G

Отзывы:

Бренды по названию

Популярные бренды