manualshive.com logo in svg

Yamaha SUPERJET 2007, Руководство владельца/оператора

Поделиться
Скачать
Yamaha SUPERJET 2007 Скачать руководство пользователя страница 59

Maintenance and care

54

use. Consult a Yamaha dealer before at-
tempting any modifications.

NOTE:

A service manual is available for purchase
through a Yamaha dealer for owners who
have the mechanical skills, tools, and other
equipment necessary to perform mainte-
nance not covered by this owner’s/operator’s
manual.

EJU33770

Owner’s/operator’s manual and tool 
kit 

It is advisable to always carry the owner’s/op-
erator’s manual and tool kit with you whenev-
er you use the watercraft. For your
convenience, a storage pouch is provided on
the watercraft for the manual and tool kit.

NOTE:

To protect these materials from water dam-
age, it would be a good idea to put them in a
waterproof bag. If your owner’s/operator’s
manual is damaged, order a replacement
from a Yamaha dealer.

The service information included in this man-
ual is intended to provide you, the owner, with
the necessary information for completing your
own preventive maintenance and minor re-
pairs. The tools provided in the tool kit are suf-

ficient for this purpose, except that a torque
wrench may also be necessary to tighten nuts
and bolts.

1

Storage pouch

1

Tool bag

2

Screwdriver

3

14/21 mm box wrench

4

Pliers

5

Open-end wrench

6

10/12 mm box wrench

7

Spark plug (one included for each cylinder)

UF1N15E0.book  Page 54  Thursday, May 18, 2006  10:47 AM

Содержание SUPERJET 2007





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды