Yamaha SUPERJET 2007 страница 44 Скачать руководство пользователя | Manualshive

Страница: 44 / 84

background image

Operation

39

NOTE:

It is not possible to start the engine with the
clip removed from the engine shut-off switch.

(4) Pull the choke knob all the way out to

start a cold engine.

NOTE:

The choke should not be used when the en-
gine is warm.

(5) While lightly squeezing the throttle lever,

push the start switch (green button), and
then release the switch as soon as the
engine starts to run.

WARNING

EWJ00590

On this watercraft, the engine is connect-
ed directly to the jet pump. Starting the en-
gine generates some thrust immediately.
Apply only enough throttle to keep the en-
gine running.

CAUTION:

ECJ00480

●

Never push the start switch while the en-
gine is running.

●

Do not operate the start switch for more
than 5 seconds, otherwise the battery
will be discharged and the engine will
not start. Also, the starter motor could
be damaged. If the engine does not start
in 5 seconds, release the start switch,
wait 15 seconds, and then try again.

(6) After the engine has warmed up, push

the choke knob in to its original position.

NOTE:

If the choke knob is left pulled out, the engine
will stall.

EJU32860

Stopping the engine

To stop the engine, release the throttle lever,
and then push the engine stop switch (red
button).

WARNING

EWJ00600

You need throttle to steer. Shutting the en-
gine off can cause you to hit an obstacle
you are attempting to avoid. A collision
could result in severe injury or death.

UF1N15E0.book Page 39 Thursday, May 18, 2006 10:47 AM

«
...
42
43
44
45
46
...
»

Содержание SUPERJET 2007





















































































Отзывы:

Нет отзывов

Похожие инструкции для SUPERJET 2007

Бренд: Oru Kayak Страницы: 21

Бренд: Hobie Страницы: 2

Бренд: Hobie Страницы: 6

Бренд: Hobie Страницы: 16

Mirage Adventure Island

Бренд: Hobie Страницы: 20

Ketterman TriFoiler

Бренд: Hobie Страницы: 27

Бренд: Hobie Страницы: 44

Бренд: Pelican Страницы: 2

Бренд: Performance Cruising Страницы: 59

Бренд: BENETEAU Страницы: 18

Бренд: Lagoon Страницы: 30

Бренд: Nauticstar Страницы: 80

2180 BAY RANGER

Бренд: Ranger Страницы: 78

Бренд: Quicksilver Страницы: 53

WaveRunner SuperJet 700 2001

Бренд: Yamaha Страницы: 107

XLT1200 WaveRunner 2002

Бренд: Yamaha Страницы: 142

Бренд: Oru Kayak Страницы: 16

Бренд: Tribord Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды