Yamaha SR125 1997, Руководство по обслуживанию

Страница: 139 / 243

4-59
TRANSMISSION SIFT CAM AND SHIFT FORK
ENG
NOTE:
NOTE:
NOTE:
4. Check:
Shift fork movement
(on the guide bar)
Unsmooth operation
Replace the shift
fork and the guide bar.
When damaged the shift fork and mission gear,
replace the facing each gear as set.
SR******
TRANSMISSION, SHIFT CAM AND SHIFT
FORK INSTALLATION
1. Measure:
Main axle assembled length
a
Assembled length (main axle):
90.9 91.1 mm
2. Install:
O-ring 1
To the drive sprocket folder groove.
3. Install:
Shift fork 3 “L” (left) 1
(face the “L” side for the clutch side.)
Shift fork 2 “R” (right) 2
(face the “R” side for the clutch side.)
Shift fork 1 “C” (center) 3
(face the “C” side for the magneto side.)
Shift fork guide bar 1 4 (long)
Shift fork guide bar 2 5 (short)
Install the shift forks with the embossed mark to
the right and in sequence (R, C, L) beginning
from the right.
4. Check:
Shift cam operation
Unsmooth operation
Repair.
Check the transmission and shift forks for
smooth operation by turning the shift cam with
your hand.