manualshive.com logo in svg

Yamaha SP2060, Руководство пользователя

Yamaha SP2060 - мощный процессор эффектов с высоким качеством звука. Подробное описание функций и настроек можно найти в Руководстве пользователя. Скачайте Руководство бесплатно на manualshive.com и начните использовать ваш SP2060 с максимальной эффективностью.

Поделиться
Скачать
background image

 

1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

 

This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not 
expressly approved by Yamaha may void your authority, granted by 
the FCC, to use the product.

 

2. IMPORTANT:

 

 When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s 
supplied with this product MUST be used. Follow all installation 
instructions. Failure to follow instructions could void your FCC 
authorization to use this product in the USA.

 

3. NOTE:

 

 This product has been tested and found to comply with the 

requirements listed in FCC Regulations, Part 15 for Class “B” digital 
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential 
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies 
and, if not installed and used according to the instructions found in 
the users manual, may cause interference harmful to the operation 
of other electronic devices. Compliance with FCC regulations does 

 

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

 

not guarantee that interference will not occur in all installations. If 
this product is found to be the source of interference, which can be 
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by 
the interference. 
Utilize power outlets that are on different branch (circuit breaker or 
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the 
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the 
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, 
please contact the local retailer authorized to distribute this type of 
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division, 
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by 
Yamaha Corporation of America or its subsidiaries.

 

FCC INFORMATION (U.S.A.)

 

* This applies only to products distributed by 

YAMAHA CORPORATION OF AMERICA.

 

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

 

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif. 

90620

Telephone : 714-522-9011

Type of Equipment : SPEAKER PROCESSOR

Model Name : SP2060

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including inter-

ference that may cause undesired operation.

See user manual instructions if interference to radio reception is 
suspected.

 

(FCC DoC)

 

ADVARSEL!

 

Lithiumbatteri—Eksplosionsfare ved fejlagtig håndtering. Udskift-
ning må kun ske med batteri af samme fabrikat og type.  Levér det 
brugte batteri tilbage til leverandoren. 

 

VARNING

 

Explosionsfara vid felaktigt batteribyte. Använd samma batterityp 
eller en ekvivalent typ som rekommenderas av apparattillverkaren. 
Kassera använt batteri enligt fabrikantens instruktion. 

 

VAROITUS

 

Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda 
paristo ainoastaan laitevalmistajan suosittelemaan tyyppiin. Hävitä 
käytetty paristo valmistajan ohjeiden mukaisesti. 

 

(lithium caution)

 

NEDERLAND / THE NETHERLANDS 

 

• Dit apparaat bevat een lithium batterij voor geheugen back-up.
• This apparatus contains a lithium battery for memory back-up.

• Raadpleeg uw leverancier over de verwijdering van de batterij op 

het moment dat u het apparaat ann het einde van de levensduur 
afdankt of de volgende Yamaha Service Afdeiing:

Yamaha Music Nederland Service Afdeiing
Kanaalweg 18-G, 3526 KL UTRECHT
Tel. 030-2828425

• For the removal of the battery at the moment of the disposal at the 

end of the service life please consult your retailer or Yamaha Ser-
vice Center as follows:

Yamaha Music Nederland Service Center
Address : Kanaalweg 18-G, 3526 KL UTRECHT
Tel

: 030-2828425

• Gooi de batterij niet weg, maar lever hem in als KCA.
• Do not throw away the battery. Instead, hand it in as small chemi-

cal waste.

 

(lithium disposal)

 

IMPORTANT NOTICE FOR THE UNITED KINGDOM

 

Connecting the Plug and Cord

 

WARNING:

 

 THIS APPARATUS MUST BE EARTHED

IMPORTANT.  The wires in this mains lead are coloured in accor-
dance with the following code:

GREEN-AND-YELLOW : EARTH
BLUE

: NEUTRAL

BROWN

: LIVE

As the colours of the wires in the mains lead of this apparatus may 
not correspond with the coloured markings identifying the terminals 
in your plug  proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be con-
nected to the terminal in the plug which is marked by the letter E or 
by the safety earth symbol

 or colored GREEN or GREEN-and-

YELLOW.
The wire which is coloured BLUE must be connected to the termi-
nal  which is marked with the letter  N or coloured BLACK.
The wire which is coloured BROWN must be connected  to the ter-
minal which is marked with the letter L or coloured RED.

 

• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.(3 wires)

Содержание SP2060


























































Отзывы:

Нет отзывов

Похожие инструкции для SP2060

EAW MX8000 Technical Specifications preview
MX8000
Бренд: EAW Страницы: 2
CAME Z Series Manual preview
Z Series
Бренд: CAME Страницы: 4
ebm-papst 4112 N/2HU Operating Manual preview
4112 N/2HU
Бренд: ebm-papst Страницы: 6
ebm-papst 4314 N/2HHPU Operating Manual preview
4314 N/2HHPU
Бренд: ebm-papst Страницы: 6
ebm-papst 8312 L Operating Manual preview
8312 L
Бренд: ebm-papst Страницы: 5
iWave iW-RainboW-G30D Hardware User'S Manual preview
iW-RainboW-G30D
Бренд: iWave Страницы: 89
Supero Supero SAS-826A User Manual preview
Supero SAS-826A
Бренд: Supero Страницы: 16
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Бренд: Dust Networks Страницы: 30
Buffalo LinkStation Mini User Manual preview
LinkStation Mini
Бренд: Buffalo Страницы: 71
Omega OMB-DAQBOARD-500 Series User Manual preview
OMB-DAQBOARD-500 Series
Бренд: Omega Страницы: 48
ZALMAN Fatal1ty FS-V7 User Manual preview
Fatal1ty FS-V7
Бренд: ZALMAN Страницы: 9
Magma ExpressBox7 Quick Installation Manual preview
ExpressBox7
Бренд: Magma Страницы: 2
Cypress Semiconductor CY7C1350G Specification Sheet preview
CY7C1350G
Бренд: Cypress Semiconductor Страницы: 15
WTI NPS-16HD20-1 User Manual preview
NPS-16HD20-1
Бренд: WTI Страницы: 178
Kontron ADA-SDVO-PEG16 User Manual preview
ADA-SDVO-PEG16
Бренд: Kontron Страницы: 14
DayTronic PC-HSICA Instruction Manual preview
PC-HSICA
Бренд: DayTronic Страницы: 13
Foxconn RAID Foldout Introduction preview
RAID Foldout
Бренд: Foxconn Страницы: 1
IBM 25CPC710 Application Note preview
25CPC710
Бренд: IBM Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды