Yamaha Sousaphones, Руководство пользователя

Страница: 16 / 22

32
Tone is not clear and pitch is poor.
• The valve felt or cork is damaged.
➞
Replace the felt or cork with a new one.
• A large amount of dirt has accumu-
lated inside the instrument.
➞
Wash it out.
• There is a large dent in the tubing or
air is leaking. Or the mouthpiece is
loose and air is leaking from around
the mouthpiece.
➞
Contact the dealer from whom you
purchased the instrument.
No sound.
• The holes in the pistons are not
aligned with the holes in the valve
casings.
➞
Make sure that the number stamped on
the piston matches the number
stamped on the valve casing.
The valves are sluggish.
• Dirt has accumulated between the
pistons and valve casings.
➞
Clean the inside of the valves.
• Dust has scratched the inside of the
valve casings.
➞
Wash out the dust as soon as possible.
• Dropping or hitting the piston has
damaged it.
➞
Never use the instrument with a
damaged piston. Contact the dealer
from whom you purchased the
instrument.
• The pistons or valve casings are
corroded.
➞
Contact the dealer from whom you
purchased the instrument.
The rotors are sluggish.
• Dirt has accumulated between the
rotors and valve casings.
➞
Oil the lever mechanisms with lever oil.
➞
Contact the dealer from whom you
purchased the instrument.
The valve slide is stuck and
cannot be removed. The slide is
sluggish.
• There is dirt or dust inside the slide.
➞
Thoroughly remove dirt and apply
some slide grease that matches the type
of slide. Or apply some tuning slide oil
to the slide.
• Dropping or hitting the slide has
caused a dent, or the slide was bent
while cleaning.
➞
Contact the dealer from whom you
purchased the instrument.
The screw is too tight and cannot
be removed.
• The screw is corroded.
• Hitting the instrument has damaged
the screw.
➞
Contact the dealer from whom you
purchased the instrument.
Air does not pass through the
instrument.
• The piston is in the wrong valve
casing.
➞
Set the piston into its proper valve casing.
The mouthpiece cannot be removed.
• The instrument was dropped or hit
with the mouthpiece attached. Or, the
mouthpiece was inserted with too
much force.
• The instrument has been left for a
long period of time with the mouth-
piece inserted in the instrument.
➞
Contact the dealer from whom you
purchased the instrument.
The instrument makes an abnor-
mal sound when played.
• Solder on the instrument has come
loose, or a foreign object is in the pipe.
➞
Contact the dealer from whom you
purchased the instrument.
Troubleshooting
altohorn̲om̲003-082̲080708.pm
08.7.8, 2:00 PM Page 32
Adobe PageMaker 6.5J/PPC