SLG-100N
8
5.
Peg
(Time required: About 5 minutes)
5-1 Remove the three (3) strings in left side (4
th
-6
th
strings) and right
side (1
st
-3
rd
strings) each. (Fig.2)
5-2 Remove the four (4) screws marked [E03] in left and right each.
The left and right pegs can then be removed. (Fig.2)
Fig.2
[E03]
[E03]
Peg
Peg
Left side Strings (4
th
-6
th
)
Right side Strings (1
st
-3
rd
)
[E03]: Round Head Wood Screw
2.1X8 (03714060)
6.
Panel Assembly
(Time required: About 2 minutes)
6-1 Remove the four (4) screws marked [F05] and the four (4) screws
marked [F06]. The panel assembly can then be removed. (Fig.3)
7.
MA Circuit Board, AUX Circuit Board,
Jack (LINE Connector Assembly)
(Time required: About 5 minutes each)
7-1 Remove the panel assembly. (See procedure 6.)
7-2
MA Circuit Board:
Pull out the three (3) rotary knobs for [VOLUME], [BASS] and
[TREBLE]. (Fig.3, 4)
Remove the two (2) screws marked [16A]. The MA circuit board
can then be removed. (Fig.4)
7-3
AUX Circuit Board:
Pull out the AUX knob and remove the screw marked [16B].
The AUX circuit board can then be removed with the jack holder.
(Fig.3, 4, 5)
Remove the hexagonal nut marked [A]. The jack holder can then
be removed from the AUX circuit board. (Fig.5)
7-4
Jack (LINE Connector Assembly):
Remove the hexagonal nut marked [10]. The jack (LINE
connector assembly) can then be removed. (Fig.3, 4)
