109
Basics Section
Quick Guide
Reference
Appendix
*19
Changes to velocity curve according
to VelDepth (with Offset set to 64)
Velocity Depth
Changes to velocity curve according
to VelOffset (with Depth set to 64)
Velocity Offset
*20
Send level (to Reverb and Chorus) cannot be
set independently for each Drum key; the
value is fixed at 127 (maximum).
*21
A setting of “C” (center) maintains the
individual Pan settings of each Element/Part
(Common edit).
*22
This parameter is not available for the Plug-in
parts.
*23
MEQ (Master Equalizer)
Shape
Determines whether the equalizer type used
is Shelving (shelv) or Peaking (peak). The
Peaking type attenuates/boosts the signal at
the specified Frequency setting, whereas the
Shelving type attenuates/boosts the signal at
frequencies above or below the specified
Frequency setting. This parameter is available
for LOW, MID, and HIGH.
Freq (Frequency)
Determines the center frequency.
Frequencies around this point are attenuated/
boosted by the Gain setting.
Gain
Determines the level gain for the Frequency
(set above), or the amount the selected
frequency band is attenuated or boosted.
Q (Frequency Characteristic)
This varies the signal level at the Frequency
setting to create various frequency curve
characteristics.
*24
You can set the parameters related Voice only
when entering the Utility mode ([F3]
→
[SF1])
from the Voice mode.
*25
mLAN connection
From this display you can set parameters
related to connection of an optional mLAN8E
(page 126). The following display is available
only when the optional mLAN8E has been
installed.
All mLAN8E-related settings in the Utility
mode are stored only to the memory on the
mLAN8E itself, and not to the User memory
of the S90. To initialize all the mLAN settings
above, use the following procedure.
*26
*27
Element control according to Velocity
(ex. PEG)
Received Velocity
(Actual KeyOn speed)
Actual Velocity
for tone generator Depth=127 (twice)
Depth=64
(normal)
Depth=32
(half)
Depth=0
127
127
64
64
0
64
127
0
127
64
Received
Velocity
(Actual KeyOn speed)
Actual Velocity
for tone generator Offset=96 (+64)
Offset=127 (+127)
Offset=64 (normal)
Offset=32 (-64)
Depends on
offset
Depends on
offset
Offset=0 (-127)
LOW
5 bands
HIGH
HIGHMID
MID
LOWMID
Q(Frequency Characteristic)
Gain
Freq
(Frequency )
0
Gain
Freq
Frequency
–
+
0
Frequency
–
+
0
EQ Low
Freq1
EQ Low
Freq2
shelv (Shelving)
peak (Peaking)
Frequency
0.1
12.0
Freq
Vendor Name
For details on this parameter,
refer to the owner's manual of
the mLAN8E.
Nickname
[SF4] button
[EXIT] button
Press the [ENTER] button to
actually set the value.
Set the Word Clock. For
details, refer to the owner's
manual of the mLAN8E.
Assign a nickname for the connection. For specific instructions on
naming, see Basic Operation on page 34. For details about the
Nickname parameter, refer to the owner's manual of the mLAN8E.
Settings
(Display)
Available Segment for EGTime
atk
attack time
atk+dcy
attack time/decay time
dcy
decay time
atk+rls
attack time/release time
all
all time
[SF5] button
[EXIT] button
Press the [ENTER] button to
actually initialize the mLAN settings.
Large
Velocity
Positive value
Amount of pitch change
Time of PEG change
Slower speed
Faster speed
Large
EGTime
EGLevel
Small
Small
Содержание S90
Страница 136: ...136 MEMO ...
