Yamaha RY20, Уполномоченное руководство по продукции

Страница: 63 / 142

Other Pattern Functions
Velocity Modify
You can modify the velocity settings for an entire track. This function
allows you to change the rate of velocity and the offset from the
recorded values.
1
Press the button to put the RY20 into Pattern Mode. Select a
pattern by rotating the Jog Dial or using the and buttons.
2
Select Velocity display page by pressing the button until the
display indicates
“VELCTY”
and the current rate flashes. Also notice that
one of the track indicators is lit.
3
Select the track you wish to modify with the Track Select/Mute buttons.
When you press a button, the track indicator for the current track
switches off as the indicator corresponding to the selected track lights up.
4
Alter the velocity rate by rotating the Jog Dial or using the and
buttons.
The default rate is
“100%”
which is the normal setting. The range is from
“000%”
to
“200%”.
As you lower the rate below
“100%”,
all of the velocity
settings are correspondingly reduced. When you raise the rate above
“100%”,
the velocity settings are correspondingly increased.
5
Change the focus to the
“LEVEL”
prompt using the cursor button.
54