Yamaha RX10H, Руководство по обслуживанию

Страница: 350 / 683

15
REAR SUSPENSION
INSP
ADJ
a
a
b
*
CAUTION:
Adjustment steps:
S
Loosen the locknut 1 .
S
Turn the adjusting nut 2 in or out to adjust the
stopper band tension.
Adjuster
thread
length 15
±
0.5 mm (0.59
±
0.02 in)
Maximum: 35 mm (1.37 in)
Minimum: 10 mm (0.40 in)
Effects Longer
More weight on skis;
Less weight transfer
Shorter
Less weight on skis;
More weight transfer
S
Tighten the locknut.
Locknut:
16 Nm (1.6 m
S
kg, 12 ft
S
lb)
Rear suspension damping force adjustment
The damping force can be adjusted by turning
the adjuster
1 .
Adjuster
16 clicks 7 clicks 1 click
out out out
Minim m Standard Maxim m
j
position
Minimum Standard Maximum
Turns out
z !
Turns in
Damping
force
Soft
z !
Hard
* With the adjuster fully turned lightly in direction
a
S
Do not continue to turn the adjuster in
direction
a
after it stops. The shock ab-
sorber can be damaged and damping force
adjustments cannot be made.
S
Do not turn the adjuster in direction b
more than 16 clicks. Even if the adjuster is
continually turned after 16 clicks, there will
be no change in the damping force.
S
Be sure to stop the adjuster at a position
where there is a click.