CONNECTIONS
Connecting speakers
En
17
Connecting speakers and subwoofers
Connect your speakers to their respective terminals on the rear panel.
■
Front/Center/Surround/Surround back speaker and
Subwoofer connection
When connecting only one surround back speaker, connect the
speaker to the SURROUND BACK L (SINGLE) jacks.
■
Presence speaker connection
When using the presence speakers, connect the speakers to the
EXTRA SP jacks as shown in the diagram below.
The presence speakers (PL/PR) that output front effect sounds can
be connected to this unit. With the sound programs (
☞
p. 48
),
sound with a richer and more spatial presence can be created.
CAUTION
•
Remove the AC power cable of this unit from the power outlet before connecting the speakers.
•
Generally speaker cables consist of two parallel insulated cables. One of these cables is a different color, or has a line running along it, to indicate different polarity. Insert the different colored (or lined) cable into the “+”
(positive, red) terminal on this unit and the speakers, and the other cable into the “–” (negative, black) terminal.
•
Be careful that the core of the speaker cable does not touch anything or come into contact with the metal areas of this unit. This may damage this unit or the speakers. If the speaker cables short circuit, “CHECK SP
WIRES!” will appear on the front panel display when this unit is switched on.
CENTER
SURROUND
SURROUND BACK/
BI-AMP
SINGLE
FRONT
1
MULTI CH INPUT
MI 1
DVD)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
SUBWOOFER
AUDIO
OUT
ZONE2
OUT
SUR.BACK
SURROUND
SURROUND
SUR.BACK
PRE OUT
WOOFER 2
FRONT
TRIGGER OUT
+12V
0.1A MAX.
CENTER
EXTRA SP
IN
REMOTE
OUT
CENTER
SINGLE
SPEAKERS
SPEAKERS
ZONE2/PRESENCE
Subwoofer
Center speaker
Front speaker
Surround
speaker
Surround back
speaker
R
L
R
L
R
L
EXTRA SP
ZONE2/PRESENCE
MI 5
SURROUND
SURROUND BACK/
BI-AMP
SINGLE
SURROUND
SUR.BACK
PRE OUT
SUBWOOFER
1
2
CENTER
SINGLE
SPEA
SPEA
Presence speaker
R
L
•
Connection of presence speakers is recommended to take full
advantage of the effects of CINEMA DSP sound programs.
•
Although you can connect both surround back speakers and
presence speakers to this unit, you cannot output sounds from
those speakers at the same time.
0.5 – 1 m
0.5 – 1 m
PL
PR
FL
FR
1.8 m
1.8 m
Continues to the
next page
Содержание RX-V867BL
Страница 1: ...Owner s Manual AV Receiver English for U S A ...
Страница 144: ... 2010 Yamaha Corporation YD000A0 OMEN ...
Страница 161: ......