Function
Configures the functions that make the unit easier to use.
Note
Default settings are underlined.
n
Input Rename
Changes the input source name displayed on the front display. You can also select a
name from the presets or a name created by the Auto Rename function.
Input sources
HDMI 1-4, AUDIO 1-2, AV 1-4, USB, Bluetooth, AUX
Default
HDMI 1-4: Auto
Others: Manual (For USB, Bluetooth, AUX only “Manual” can be selected.)
Procedure to rename automatically
1
Use the cursor keys (
q
/
w
) to select an input source to be
renamed.
2
Use the cursor keys (
e
/
r
) to select “Auto”.
The unit creates a name automatically according to the connected
device.
3
To check a created name, press ENTER.
Note
During selecting “Auto”, the created name is saved even after the device connection is
terminated. To reset to the default setting, switch the setting to “Manual” at once and then set
it again to “Auto”.
4
To change another input source name, repeat steps 1 to 3.
5
To exit from the menu, press SETUP.
Procedure to rename manually
1
Use the cursor keys (
q
/
w
) to select an input source to be
renamed.
2
Use the cursor keys (
e
/
r
) to select “Manual” and press
ENTER.
Note
To select the preset name, use the cursor keys (
e
/
r
).
3
Press ENTER.
The edit screen is displayed.
4
Use the cursor keys and ENTER key to edit the name, and then
select “OK” to confirm the new name.
Note
To cancel the entry, select “CANCEL”.
5
To change another input source name, repeat steps 1 to 4.
6
To exit from the menu, press SETUP.
En
96
