Yamaha RX-V459 - AV Receiver - 6.1 Channel Скачать руководство пользователя страница 42

Страница: 42 / 111

USING OTHER FEATURES

The “DIRECT STEREO” mode allows sources to bypass
the decoders and DSP processors of this unit so that you
can enjoy pure hi-fi sound from 2-channel PCM and
analog sources.

Set the component selector switch to AMP and
then press DIRECT ST. on the remote control to
select “DIRECT STEREO”.

• To avoid unexpected noise, do not play CDs encoded in DTS

when the “DIRECT STEREO” mode is selected.

• When multi-channel signals (Dolby Digital and DTS) are input,

this unit automatically switches to the corresponding analog
input. When “DTS” is selected as the input mode (see page 33),
no sound will be output.

• No sound will be output from the subwoofer.
• “TONE CONTROL” (see page 31) and “SOUND MENU” (see

page 78) settings (except for speaker level settings) are not
effective.

• The front panel display automatically dims.

You can also select the “DIRECT STEREO” mode by pressing
the PROGRAM

buttons on the front panel repeatedly.

You can display the format, sampling frequency, channel,
bit rate, and flag data of the current input signal.

Press one of the input selector buttons to
select the desired input source.

Set the component selector switch to AMP
and then press STRAIGHT on the remote
control to select “STRAIGHT”.

“

Press

to display the information about

the input signal.

Enjoying pure hi-fi stereo sound

Notes

AMP

SOURCE

DIRECT ST.

DIRECT STEREO

Displaying the input source
information

MULTI CH IN

SLEEP

CD-R

DVD

DTV

CBL

TUNER

V-AUX

DVR

EFFECT

STRAIGHT

ENT.

AMP

SOURCE

STRAIGHT

A-E/CAT.

ENTER

PRESET/CH

Содержание RX-V459 - AV Receiver - 6.1 Channel
















































































































Результаты поиска

Содержание RX-V459 - AV Receiver - 6.1 Channel

Отзывы:

Похожие инструкции для RX-V459 - AV Receiver - 6.1 Channel

Бренды по названию

Популярные бренды

Yamaha RX-V459 - AV Receiver - 6.1 Channel, Руководство пользователя

Результаты поиска

Содержание RX-V459 - AV Receiver - 6.1 Channel

Отзывы:

Похожие инструкции для RX-V459 - AV Receiver - 6.1 Channel

Бренды по названию

Популярные бренды