Configuring the advanced settings (ADVANCED SETUP menu)
Basic operation of the ADVANCED SETUP menu
Perform the following basic procedure to operate the “ADVANCED SETUP” menu while
viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z
(power).
(power)
z
STRAIGHT
PROGRAM
The top item and its setting of the “ADVANCED SETUP” menu appear on
the front display.
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press
z
(power) to set the unit to standby mode and turn it on
again.
This completes the settings.
Note
For details on the default settings, see the following:
▪ “Default settings of the ADVANCED SETUP menu” (p.111)
ADVANCED SETUP menu items
Use the following table to configure system settings of the unit.
Item
Function
Page
SP IMP.
(U.S.A. and Canada models only)
Changes the speaker impedance setting.
p.85
REMOTE ID
Selects the unit’s remote control ID.
p.86
TU
(Asia, Taiwan, Brazil and Central and South America models only)
Changes the FM/AM tuning frequency setting.
p.86
TV FORMAT
Switches the video signal type of HDMI output.
p.87
4K MODE
Selects the HDMI 4K signal format.
p.87
INIT
Restores the default settings.
p.88
UPDATE
Updates the firmware.
p.88
VERSION
Checks the version of firmware currently installed on the unit.
p.88
Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
ENHANCER
LINK
ECO
MASTER
OUT
2
-R
es
Hi
YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED
ZONE
3 B
2 A
VOL.
FPR
SL
SW
SR
SBL
SB
SBR
FPL
MUTE VIRTUAL
SP IMP.••8¬MIN
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
ADVANCED SETUP menu
“SP IMP.”
Settings
6
Ω
MIN
Select this option when you connect 6-ohm speakers to the unit.
8
Ω
MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
En
85