background image

- 3 -

ANTENNA

FM

GND AM

CENTER

SURROUND

FRONT

SUBWOOFER

SPEAKERS

Caution:

•  Remove the AC power cord of this unit from the power outlet 

before connecting the speakers. 

•  Generally speaker cables consist of two parallel insulated 

cables. One of these cables is a different color, or has a 
line running along it, to indicate different polarity. Insert the 
different colored (or lined) cable into the “+” (positive, red) 
terminal on this unit and the speakers, and the other cable into 
the “-” (minus, black) terminal. 

•  Be careful that the core of the speaker cable does not touch 

anything or come into contact with the metal areas of this 
unit. This may damage this unit or the speakers. If the speaker 
cables short circuit, “CHECK SP WIRES!” will appear on the 
front panel display when this unit is switched on. 

1

1

 

Connect the speakers

Connecting front speakers

FR

ONT

KERS

2

3

1

4

1

  Remove approximately 10mm of insulation from 

the ends of the speaker cables, and twist the bare 
wires of the cables together fi rmly so that they will 
not cause short circuits.

2

  Loosen the speaker terminals.

3

  Insert the bare wire of the speaker cable into the 

gap on the side of the terminal.

4

  Tighten the terminal. 

Connecting center speakers / 
surround speakers

CENTER

SURR

OUND

SPEAKE

2

3

1

1

  Press the tab on the speaker terminal down. 

2

  Insert the speaker cable end into the terminal. 

3

  Lift the tab to fi x the speaker cable in place. 

Surround speaker

R        L

Front speaker

R               L

Subwoofer

Center speaker

Connecting the subwoofer

1

  Connect the subwoofer input jack to the SUBWOOFER 

jack on this unit with an audio pin cable. 

2

  Set the subwoofer volume as follows.

Volume: Set to approximately half volume (or slightly less than 
half). 
Crossover frequency (if available): Set to maximum.

Subwoofer examples

VOLUME

MIN

MAX

CROSSOVER/

HIGH CUT

MIN

MAX

Содержание RX-V371BL









Отзывы: