En
38
5.2.4 Bi-Amp [ext.RP] (RX-V3085 only)
Y
When this configuration is applied, you cannot utilize the ZONE OUT/PRE OUT jacks for connecting an external
amplifier for Zone3 (p.108).
■
Connecting front speakers that support bi-amp
connections
When using front speakers that support bi-amp connections, connect them to the FRONT
terminals and EXTRA SP1 terminals.
To enable the bi-amp function, configure the “Power Amp Assign” setting in the “Setup” menu
after connecting the power cable to an AC wall outlet (p.53).
X
The FRONT terminals and EXTRA SP1 terminals output the same signals.
Speaker
Connect to
12
FRONT and EXTRA SP 1 (bi-amp connection)
3
CENTER
45
SURROUND
67
(not used)
ER
EXTRA SP 2
TY
R.PRESENCE (PRE OUT) via external power amplifier
9
SUBWOOFER 1-2
1
3
4
5
9
9
2
E
R
Y
T
via
external amp
via
external amp
Bi-amp
Caution
Before making bi-amp connections, remove any brackets or cables that connect a woofer with a
tweeter. Refer to the instruction manual of the speakers for details. If you are not making bi-amp
connections, make sure that the brackets or cables are connected before connecting the speaker
cables.
SPEAKERS
CENTER
FRONT
SURROUND BACK
R.PRESENCE
R
R
R
L
L
L
R
L
ZONE 2/ZONE 3/F.PRESENCE
ZONE 2/ZONE 3/BI-AMP
EXTRA SP2
F.PRESENCE
EXTRA SP1
1
2
3
9
4
5
9
The unit (rear)