Yamaha RX V2700 - AV Network Receiver Скачать руководство пользователя страница 150

Страница: 150 / 174

146

TROUBLESHOOTING

Status message

Cause

Remedy

See

page

Connect error

There is a problem with the signal path
from your network to this unit.

Check the connection between this unit and the
LAN port on your router or hub.

Make sure your router is properly connected and
turned on. Also, make sure your modem is
properly connected and turned on when you are
attempting to listen to Internet Radio.

Disconnected

Your USB memory device or USB
portable audio player has been
disconnected from the USB port of this
unit.

Check the connection between this unit and your
USB memory device or USB portable audio
player.

—

The PC server or MCX-2000 previously
connected to this unit no longer exists.

Connect this unit to the available PC server or
MCX-2000.

There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.

Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.

Try resetting your USB memory device or USB
portable audio player.

—

Access error

This unit cannot access your USB
memory device or USB portable audio
player.

Try another USB memory device or USB portable
audio player.

—

There is a problem with the signal path
from your USB memory device or USB
portable audio player to this unit.

Turn off this unit and reconnect your USB
memory device or USB portable audio player to
the USB port of this unit.

Try resetting your USB memory device or USB
portable audio player.

—

Unable to play

This unit cannot play back the songs
currently stored on your PC.

Make sure Windows Media Connect 2.0 is
installed on your PC.

—

Check that the songs currently stored on your PC
are playable (MP3, WMA, and WAV).

—

Store some other playable music files (MP3,
WMA, and WAV) on your PC.

—

The network may be overloaded with
heavy traffic, and playback is interrupted.

Try preparing a network exclusively for use with
this unit to separate it from general network
traffic.

—

List updated

The list of the contents stored on your PC
server or MCX-2000 has been updated.

Bookmark ON

The desired Internet Radio station has
been added to the “Bookmarks” list.

Bookmark OFF

The stored Internet Radio station has
been removed from the “Bookmarks”
list.

Empty Memory!

No items are assigned to the selected
numeric button.

Assign the desired item to the numeric button.

Not found!

This unit cannot find the assigned item
for the selected numeric button.

Connect the USB device that stores the preset
item.

Turn on the PC or MCX-2000.

Try again when the selected Internet Radio is
providing the service.

Preset the desired item to the numeric button (1-8)
again.

Содержание RX V2700 - AV Network Receiver















































































































































































Результаты поиска

Содержание RX V2700 - AV Network Receiver

Отзывы:

Похожие инструкции для RX V2700 - AV Network Receiver

Бренды по названию

Популярные бренды

Yamaha RX V2700 - AV Network Receiver, Руководство пользователя

Результаты поиска

Содержание RX V2700 - AV Network Receiver

Отзывы:

Похожие инструкции для RX V2700 - AV Network Receiver

Бренды по названию

Популярные бренды