Yamaha RX-V2065BL, Руководство пользователя

Страница: 84 / 114

80
En
Troubleshooting
If an operation takes longer than usual or an error occurs, one of the following messages may appear on the GUI screen.
In this case, read the cause and follow the corresponding remedies.
iTunes Tagging (U.S.A. model only)
Problem Cause Remedy
See
page
Tag data cannot be
transferred to your
iPod when it is station
in the Yamaha iPod
universal dock (YDS-
10).
“YDS-10” does not support tag file
transfer.
Use “YDS-11” to transfer tag data from this unit to
your iPod.
—
Status message Cause Remedy
See
page
Insufficient Data Tag data is not saved because of invalid
data.
The selected HR Radio program (or song being
played) does not support the iTunes Tagging feature.
—
Tag Already Stored Tag data for the same content has been
already saved.
Tag Storage full Tag data cannot be stored because the
internal memory of this unit is full.
Station your iPod in the Yamaha iPod universal dock
(YDS-11) connected to the DOCK terminal of this
unit.
—
iPod full
Tags cannot be stored
Tag data cannot be stored on your iPod
because the HDD space of your iPod is
full.
Delete unnecessary data from your iPod to make
room and try again.
—
Transferring Failed Tag data cannot be transferred to your
iPod.
Check if the iPod is stationed in the Yamaha iPod
universal dock (YDS-11) properly.
—
Storing Tag Tag data is being stored in the internal
memory of this unit.
Transferring Tag data is being transferred to your iPod.
Tag(s)Sent Tag data has been transferred to your
iPod.
XM Satellite Radio (U.S.A. model only)
Status message Cause Remedy
See
page
CHECK XM TUNER
The XM Mini-Tuner is not installed in the
XM Mini-Tuner Home Dock or the XM
Mini-Tuner Home Dock is not connected
to this unit.
Confirm the XM Mini-Tuner is fully seated in the
dock and check the XM Mini-Tuner Home Dock
cable is connected to this unit.
35
CHECK ANTENNA The XM antenna is not connected to the
XM Mini-Tuner Home Dock or the XM
antenna cable has become damaged.
Check that the XM antenna is securely connected to
the XM Mini-Tuner Home Dock and check the
antenna cable for damage. Replace the XM antenna if
the cable is damaged.
35
LOADING XM The XM Mini-Tuner is acquiring audio or
program information from the XM
satellite signal. This message can also
occur in weak XM signal conditions. Note
that this unit may not respond to some
operations while this message is
displayed.
This message should disappear in a few seconds in
good signal conditions. If you see this message often,
reposition the XM antenna to get better signal
reception. Use the “Antenna” information on the front
panel display or XM information on the GUI screen
to check the antenna reception level.
38