Firmware Update Procedure for RX-V2065
Page.4 of 7
Step4 Select “USB FirmUpdate” from the menu
Rotate the
PROGRAM
selector counterclockwise and select
“USB FirmUpdate
”.
Step5 Start
firmware
update
Press
STRAIGHT
button to start update.
NOTE:
Be aware that performing this update will clear all your receiver
setting back to factory default.
Firmware reprogramming in progress
CAUTION!
DO NOT interrupt power or remove the USB thumb drive during the
update.
In case the power is accidentally cut off resulting in a condition where you
can’t recover normal operation, refer to troubleshooting method CASE#3
on page 7.
Step6
When completed, “
UPDATE SUCCESS
” appears on the display.
Turn off the power of the receiver by pressing MAIN ZONE button.
Remove USB thumb drive.
Step7 Check updated firmware version
Enter Advanced Setup mode and select “VER” on the menu.
(See “Confirming Firmware Version section” for details)
MAIN ZONE
STRAIGHT
PROGRAM
