Firmware Update Procedure for RX-V2065
Page.2 of 7
Confirming Firmware Version
Below are the procedures to confirm your firmware version.
Step1
Enter ADVANCED SETUP mode
Confirm that your receiver is powered off. (Standby condition)
While pressing the
STRAIGHT
button, press (and release) the
MAIN ZONE
button and keep depressing the
STRAIGHT
button until “
ADVANCED
SETUP
” appears on the front panel display.
(Note: “
ADVANCED SETUP
” is displayed only for a few seconds.)
Step2
Select Version display from the menu
Rotate the
PROGRAM
selector counterclockwise and select “
VER
”.
Latest version would be
“VER036.104.037”
.
“036”, “103” and “034” each represents the version of several programs in
your receiver.
If your receiver’s version is lower than above, perform firmware update
described in the following pages.
If “ERROR” appears, refer to the troubleshooting methods on page 7 to
recover.
MAIN ZONE
PROGRAM STRAIGHT
