48
En
Setting the option menu for each input source (Option menu)
Decoder Mode
Selects DTS digital audio signals for reproduction.
Extended Surround
Selects whether to reproduce multi-channel input signals
in 6.1- or 7.1-channel when surround back speakers are
used.
Signal Info
Displays information on audio and video signals on the
GUI screen and front panel display. You can change items
to be displayed using
j
Cursor
k
/
n
.
•
Audio information
•
Notes
•
“No Signal” is displayed when no signals are input and “---” is displayed
when signals that this unit cannot recognize are input.
•
The bit rate may vary during playback.
•
Video information
•
•
HDMI error message
(appears only when an error has occurred)
•
Audio Mode
Sets FM (or HD Radio) broadcasting receiving mode.
Note
•
(U.S.A. model only)
Select “Auto” to tune into HD Radio stations. When “Mono” is selected,
you can tune into analog stations only.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (page 29).
y
•
(U.S.A. model only)
Automatically detects FM and AM HD Radio stations and analog FM
radio stations and registers them as preset stations.
Clear Preset
Clears preset station (TUNER: page 30, XM: page 35,
SIRIUS: page 39).
Parental Lock
Set the Parental Lock (page 40).
Input source:
HDMI1-4, AV1-4
Choices:
Auto*, DTS
Auto
Automatically selects audio input signals.
DTS
Selects DTS signals only. Other input signals
are not reproduced.
Input source:
HDMI1-4, AV1-4
Choices:
Auto*, PLIIxMovie, PLIIxMusic, EX/ES, Off
Auto
Automatically selects the most suitable
decoder according to whether a flag for
reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-
channel.
PLIIx
Movie
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMovie decoder
whether or not surround back channel signals
are contained. You can select this parameter
when two surround back speakers are
connected.
PLIIx
Music
Always reproduces signals in 6.1- or 7.1-
channel using the PLIIxMusic decoder whether
or not surround back channel signals are
contained. You can select this parameter when
one or two surround back speakers are
connected.
EX/ES
Automatically selects the most suitable
decoder for input signals whether or not the
flag for reproducing surround back channel is
present, and always reproduces signals in 6.1-
channel.
Off
Always reproduces original signals whether or
not the flag for reproducing surround back
channel is present.
Input source:
HDMI1-4, AV1-4, USB
Format
Format of digital audio signals.
Channel
The number of input signal channels
(front/surround/LFE).
For example, if input signal channels are
3 front channels, 2 surrounds and LFE,
“3/2/0.1” is displayed.
If a channel that cannot be expressed as
the above, a total number of channels
such as “5.1ch” may be displayed.
Sampling
Frequency
The sampling frequency per second in
analog-to-digital conversion.
Bitrate
The bit rate of input signal per second.
Video In
Format and resolution of video input
signal.
Video Out
Format and resolution of video output
signal.
Message
Error messages about HDMI signals and
HDMI components. See the following for
details of the error messages.
HDCP Error
HDCP authentication failed.
Device Over
The number of HDMI components
connected is over the limit.
Out of Res.
The connected monitor is not compatible
with the video input signal.
Input source:
TUNER
Choices:
Auto*, Mono
Auto
Receives in stereo mode by priority.
Mono
Receives in monaural mode. You can get a
better reception in monaural mode.
Input source:
TUNER
Input source:
TUNER, XM, SIRIUS
Input source:
SIRIUS
