PREPARATIONS
➤
Placing speakers
En
13
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer in your room. This section describes the representative speaker layout
examples.
• You can use the Zone2 function or bi-amp connections simultaneously with the 2.1- or 3.1-channel system.
1
Placing speakers
Caution
• Under its default settings, the unit is configured for 6-ohm speakers. When connecting speakers with impedance of 8 ohm or more, set the unit’s speaker impedance to “8
MIN”. For details, see “Setting the speaker
impedance” (p.15).
Speaker type
Abbr.
Function
Speaker system (the number of channels)
5.1
4.1
3.1
2.1
Front (L)
1
Produce front right/left channel sounds (stereo sounds).
●
●
●
●
Front (R)
2
●
●
●
●
Center
3
Produces center channel sounds (such as movie dialogue and vocals).
●
●
Surround (L)
4
Produce surround right/left channel sounds.
●
●
Surround (R)
5
●
●
Subwoofer
9
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”.
●
●
●
●
1 2 3 4 5 6 7 8 9 10
RX-S600_S600D_om.book Page 13 Tuesday, May 28, 2013 1:36 PM
