Yamaha RX-A3060, Руководство пользователя

Страница: 116 / 230

En
116
⬛
Tone Control (Tone Control)
Adjusts the level of high-frequency range (Treble) and low-frequency range (Bass) individually.
Choices
Treble (Treble), Bass (Bass)
Setting range
-6.0 dB to 0.0 dB to +6.0 dB, 0.5 dB increments
Y
• When both “Treble” and “Bass” are 0.0 dB, “Bypass” appears.
• If you set an extreme value, sounds may not match those from other channels.
X
You can also adjust the “Tone Control” setting with the front panel controls by pressing TONE/BALANCE
repeatedly to select “Treble” or “Bass”, and PROGRAM to make an adjustment.
⬛
YPAO Volume (YPAO Volume)
Enables/disables YPAO Volume or Adaptive DRC.
YPAO Volume (YPAO Vol.)
Enables/disables YPAO Volume. When YPAO Volume is enabled, the high- and low-frequency
levels are automatically adjusted according to the volume so that you can enjoy natural
sounds even at low volume.
Settings
X
• YPAO Volume works effectively after the measurement results of “Auto Setup” have been already saved (p.53).
• We recommend enabling both YPAO Volume and Adaptive DRC when you are listening at lower volumes or at
night.
Adaptive DRC (A.DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted when
the volume level is adjusted. When it is set to “On”, it is useful for listening to playback at a low
volume at night.
Settings
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a high
volume.
Input Settings
(Input Settings)
Input Trim
(In.Trim) Corrects volume differences between input
sources.
119
Audio Select
(A.Sel)
Selects the audio input jack to use when more
than one audio connection is made for one input
source.
119
Video Out
(V.Out) Selects a video to be output with the audio input
source.
119
FM Mode
(FM Mode) Switches between stereo and monaural for FM
radio reception.
119
Traffic Program
(TrafficProgram)
(U.K. and Europe models only)
Automatically searches for a traffic information
station.
86
Shuffle
(Shuffle) Configures the shuffle setting for the USB storage
device (p.93) or media server (p.97).
⏤
Repeat
(Repeat)
Configures the repeat setting for the USB storage
device (p.93) or media server (p.97).
⏤
Item Function Page
Off (Off) Disables YPAO Volume.
On (On) Enables YPAO Volume.
Off (Off) The dynamic range is not automatically adjusted.
On (On) Automatically adjusts the dynamic range when YPAO Volume is enabled.
Volume: low Volume: high
Input level Input level
On
Off
On
Off
Ou
tp
u
t l
e
vel
Ou
tp
u
t le
vel