Yamaha RX-A3010, Руководство по быстрой настройке

Страница: 6 / 8

6
En
By using the Yamaha Parametric room Acoustic Optimizer (YPAO) function, this unit automatically detects speaker
connections and distances from the listening position, and optimizes the speaker settings such as volume balance and
acoustic parameters to suit your room.
Preparing for YPAO
5 Optimizing the speaker settings automatically (YPAO)
• During the measuring process, the test tones are output at high volume. Take care
that the test tone does not frighten small children. Also, refrain from using this
function at night when it may be a nuisance to others.
• During the measuring process, you cannot adjust the volume.
• During the measuring process, keep the room as quiet as possible.
• Do not connect headphones.
• If your subwoofer supports the auto-standby function, disable it.
• YPAO measurement is not performed correctly when any obstacles are in the room.
• During the measuring process (about 3 minutes), keep stuff in the corners or
remove it from the room.
1
Connect the YPAO microphone to the
YPAO MIC jack on the front panel.
The following screen appears on the TV.
• To cancel the operation, disconnect the YPAO microphone
before starting the measurement.
2
To start the measurement, use the cursor
keys to select “Measure” and press
ENTER.
The measurement will start in 10 seconds.
The following screen appears on the TV when
the measurement finishes.
• If any error message (such as E-1) or warning message (such
as W-2) appears, see “Error messages” (p.54) or “Warning
messages” (p.55) in “Owner’s Manual”.
• If the warning message “W-1:Out of Phase” appears, see “If
‘W-1:Out of Phase’ appears” (next page).
VOLUME HIGH CUT
CRO SS OVER/
MIN MAX MIN MAX
S OURCE RECEIVER
AV
AUDIO
1 2 3 4
5 6 7
V-AUX
1 2 3 4
MULTI PHONO U S B NET
TUNER DOCK S IRIU S [ A ]
CLA SS ICAL
LIVE
CLUB
ENTERTAIN
MOVIE S TEREO S TRAIGHT
INPUT
PURE
DIRECT
MUTE
TV
S CENE
1 2 3 4
PROGRAM VOLUME
TV VOL
MUTE
MODE
HOLD TAG PRG S ELECT
TOP MENU
RETURN DI S PLAY
POP-UP/MENU
TV CH
PRE S ET
ENTER
ON S CREEN
OPTION
S OURCE RECEIVER
AV
AUDIO
1 2 3 4
5 6 7
V-AUX
1 2 3 4
MULTI PHONO U S B NET
TUNER DOCK S IRIU S [ A ]
This unit (front)
Place the YPAO microphone at ear
height in your listening position. We
recommend using a tripod to adjust the
height. You can use the tripod screws to
fix the microphone in place.
YPAO microphone
Listening position
Ear height
Cursor keys
ENTER
RETURN
Turned on the subwoofer and set
the volume to half. If the
cross-over frequency is
adjustable, set it to maximum. Turned on the subwoofer and set
the volume to half. If the
cross-over frequency is
adjustable, set it to maximum.