Yamaha RX-A2000, Руководство пользователя

Страница: 63 / 195

PLAYBACK
En
63
Selecting a frequency for reception
(Normal tuning)
1
Press
d
TUNER to switch to the tuner input.
2
Press
y
FM or
y
AM to select a band to
receive.
3 Use
y
TUN./CH
H
/
I
to set a frequency to
receive.
y TUN./CH
H
Increases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a higher frequency than the current one.
J
1
y
TUN./CH
I
Decreases the frequency. Press and hold this key for
longer than a second to search automatically for a station
on a lower frequency than the current one.
J
1
FM/AM tuning
FM MEMORY AM
3
TUN./CH
2 1
6
9 8 7
0
4 5
TUNER
PRG SELECT
CATEGORY
SOURCE RECEIVER
AV
AUDIO
4 3 1 2
7 5 6
V-AUX
4 3 1 2
USB MULTI NET PHONO
DOCK SIRIUS [ A ]
d
r
y
v
When using the FM/AM tuner, adjust the direction of
the FM/AM antenna connected to this unit to get the
best reception.
VOLUME
ENHANCER
F M 8 7 . 5 M H z
■
Entering a frequency number
In normal tuning mode, use the
v
Numeric keys to
enter a frequency. Leave the decimal point out when
entering a number.
J
2
For example, enter as follows to select a station on
98.5 MHz.
VOLUME
STEREO TUNED
ENHANCER
STEREO TUNED
F M 9 8 . 5 M H z
Lights up when a broadcast is received
from a station
Lights up when a stereo broadcast is received
9 8 5
■
Registering stations manually (Manual
Preset)
Select stations manually and register them as presets
individually.
1
Tune in to the station you want to
register, referring to “Selecting a
frequency for reception (Normal
tuning).”
J
3
2
Use one of the following methods to
register the station you are currently
receiving.
■
Registering to a preset number to which
no station is registered
Press
y
MEMORY for 3 seconds or longer.
The station will be registered automatically to the
lowest open preset number (or the next number after
the one registered most recently).
VOLUME
STEREO TUNED
ENHANCER
0 1 : F M 9 8 . 5 M H z Preset
M e m o r i z e d
Registered frequencies
Continues to the
next page
J
1 :
When searching for a station, release the key once the search has
started.
J
2 : “Wrong Station!” appears on the front panel display when you
enter a frequency that is out of receivable range. Make sure that
the frequency entered is correct.
J
3 :
When registering a sub-audio program “HD2” to “HD8” of the
FM HD Radio station, press
r
PRG SELECT
to select the
desired audio program.