SETUP
Setting various functions (Setup menu)
113
Surround
Selects the size of the surround speakers.
Surround Back
Selects the size of the surround back speakers.
Front Presence
Specify connection of front presence speakers.
Subwoofer1 / Subwoofer2
Confirms the subwoofer.
SWFR Layout
Select a layout of two subwoofers connected to this unit.
Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Large
Select this when the surround speakers are large.
Small
(Default)
Select this when the surround speakers are small. The
crossover frequency can be selected from 40Hz,
60Hz, 80Hz
(Default)
, 90Hz, 100Hz, 110Hz, 120Hz,
160Hz, or 200Hz when selecting this. All frequencies
below the selected frequency will be sent to the
subwoofer.
None
Select this when no surround speakers are connected.
The front speakers will produce surround channel
audio signals.
•
When set to “None,” no sound is produced from the surround
back speaker even if that speaker is connected.
•
When set to “None,” the sound programs will change to Virtual
CINEMA DSP mode.
Largex1
Select when one large surround back speaker is
connected.
Largex2
Select when two large surround back speakers are
connected.
Smallx1
Select when one small surround back speaker is
connected.
Smallx2
(Default)
Select when two small surround back speakers are
connected.
None
Select this when no surround back speakers are
connected.
•
When there are no surround speakers are connected, the setting
will automatically change to “None.”
•
You can set surround back audio signals, including from the
playback source, to be mixed down and produced from a single
speaker (6.1-channel layout) or produced from left and right
surround speakers (5.1-channel layout).
Use
(Default)
Select this when front presence speakers are
connected.
None
Select this when front presence speakers are not
connected.
Use
(Default)
Select this when subwoofer is connected. During
playback, the subwoofer will produce audio from the
LFE (low-frequency effect) channel and bass audio
from other channels.
J
1
Select the phase of the subwoofer from the following
items if the bass audio is lacking or unclear.
Normal
(Default)
Does not change the subwoofer
phase.
Reverse
Reverses the subwoofer phase.
None
Select this when subwoofer is not connected. The
front speakers will produce audio from the LFE (low-
frequency effect) channel and bass frequency audio
from other channels, when both “Subwoofer1” and
“Subwoofer2” are set to “None.”
Left + Right
Select when two subwoofers are arranged with one to
the left and one to the right of this unit.
Front + Rear
Select when two subwoofers are arranged with one in
front of and one behind this unit.
Monaural x2
(Default)
Select when two subwoofers are arranged in a manner
not suited to either or the other setting options.
Off
(Default)
Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
On
The subwoofer and the front speakers produce the
front channel low-frequency components.
When “Subwoofer1” and “Subwoofer2” are set to “None” or
“Front” is set to “Small,” “Extra Bass” is disabled.
J
1 :
Enabling “Extra Bass” allows both the subwoofer and the front speakers to
produce bass audio.
Содержание RX-A2000
Страница 1: ...Owner s Manual AV Receiver English for U S A ...
Страница 169: ... 2010 Yamaha Corporation YC712A0 OMEN1 ...
Страница 186: ...AV Receiver English Safety Brochure ...
Страница 190: ... 2010 Yamaha Corporation YC712A0 SBEN ...