En
28
3
Configure the settings for HDMI Control.
a
Enable HDMI Control on the TV and playback devices (HDMI Control-compatible BD/
DVD player, etc).
b
Turn off the main power of the TV and then turn off this unit and playback devices.
c
Turn on this unit and playback devices and then turn on the main power of the TV.
d
Switch the TV input to display the video from this unit.
e
Check the followings.
On this unit
: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV
: The video from the playback device is displayed.
f
Check that this unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
Now the necessary settings are complete.
If you select a TV program with the TV remote control, the input source of this unit will
be automatically switched to “AUDIO1” and the TV audio will be played back on this
unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and re-plugging) the
devices. It may solve the problem.
• “AUDIO1” is set as TV audio input at the factory. If you have connected any external device to the
AUDIO1 jacks, use “TV Audio Input” (p.109) in the “Setup” menu to change the TV audio input
assignment. To use the SCENE function (p.48), you also need to change the input assignment for
SCENE(TV).
■
Connection method 3 (TV with HDMI input jacks)
Connect the TV to this unit with an HDMI cable and an audio cable (digital optical or
stereo pin cable).
If switch the input source of this unit to “AUDIO1” by pressing AUDIO1 or SCENE(TV),
the TV audio will be played back on this unit.
• If you make an HDMI connection between your TV and this unit, any videos input to this unit can be output
to the TV no matter how you connect video devices to this unit. For details, see “Video signal flow” (p.136).
• You can connect another TV or a projector by using the HDMI OUT 2 jack (p.30).
• If you have connected any external device to the AUDIO1 jacks, connect the TV to one of the AUDIO2~4
jacks. To use the SCENE function (p.48), you also need to change the input assignment for SCENE(TV).
DOCK
FM
75Ω
ANTENNA
Y
P
B
OPTICAL
AV OUT
R
L
HDMI OUT
ARC
1
2
(1
MONITOR OUT/
ZONE OUT
AV 1
AV 1
AV 3
AV 4
AV 2
AV 1
AUDIO 4
AUDIO 3
AUDIO 2
(3 CD)
AUDIO 1
(2 TV)
(1 BD/DVD)
FRONT
5
OPTICAL
4
OPTICAL
3
COAXIAL
2
COAXIAL
1
COAXIAL
6
AM
GND
(4 RADIO)
HD Radio
SIRIUS
PHONO
NETWORK
A
AV 2
B
GND
HDMI
HDMI OUT
ARC
1
2
OPTICAL
AUDIO 1
(2 TV)
5
AUDIO
OPTICAL
R
L
O
O
L
R
L
R
HDMI
HDMI
This unit (rear)
HDMI OUT 1 jack
AUDIO1 (OPTICAL or AUDIO)
jacks
Audio output
(digital optical or analog stereo)
TV
HDMI input
1 2
TV connection
3 4 5 6 7 8
Содержание RX-A1010
Страница 145: ... 2011 Yamaha Corporation YD503A0 OMEN1 YAMAHA CORPOAATIO I R ...
Страница 180: ......
Страница 181: ......
Страница 182: ...RX A 010 ...