E-17
English
SPECIFICATIONS
AUDIO SECTION
Minimum RMS Output Power per Channel
8 ohms, 20 Hz to 20 kHz, 0.019% THD
.......................................................... 100W
6 ohms, 20 Hz to 20 kHz, 0.03% THD
.......................................................... 120W
Dynamic Power per Channel (IHF)
8/6/4/2 ohms ................ 140/170/220/290W
Power Band Width
8 ohms, 50W, 0.03% THD
......................................... 10 Hz to 50 kHz
Damping Factor (SPEAKERS A)
8 ohms, 20 Hz to 20 kHz ...................... 240
Input Sensitivity/Impedance
PHONO MM ................ 2.5 mV/47 k-ohms
CD etc. ......................... 150 mV/47 k-ohms
MAIN IN ............................. 1V/30 k-ohms
Output Level/Impedance
REC OUT ................... 150 mV/1.7 k-ohms
PRE OUT ............................ 1V/1.2 k-ohms
Headphones Output/ Impedance
..................................... 0.47V/470 ohms
Frequency Response (CD to SP OUT)
...................... 20 Hz to 20 kHz, ±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT .......... 0.008%
CD to SP OUT (50W/8 ohms) ....... 0.012%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM (5 mV Input Shorted)
.......................................................... 87 dB
CD DIRECT AMP SW: ON (Shorted)
........................................................ 110 dB
Residual Noise (IHF-A Network)
CD DIRECT AMP SW: ON ............. 30 µV
PURE DIRECT SW: ON ................ 110 µV
Channel Separation
(Input 5.1 k-ohms terminated, 10 kHz) 50 dB
Tone Control Characteristics
BASS:
Boost/cut .......... ±10 dB (20 Hz)
Turnover Frequency ....... 350 Hz
TREBLE: Boost/cut ........ ±10 dB (20 kHz)
Turnover Frequency ...... 3.5 kHz
Continuously variable LOUDNESS Control
Attenuation ........................ –30 dB (1 kHz)
VIDEO SECTION
Input Level/Impedance ..... 1 Vp-p/75 ohms
Output Level/Impedance .. 1 Vp-p/75 ohms
FM SECTION
Tuning Range
[U.S.A. and Canada models]
..................................... 87.5 to 107.9 MHz
[Australia model]
..................................... 87.5 to 108.0 MHz
50 dB Quieting Sensitivity (IHF, 75 ohms)
Mono .............................. 2.0 µV (17.3 dBf)
Stereo .............................. 25 µV (39.2 dBf)
Alternate Channel Selectivity ........... 70 dB
Signal-to-Noise Ratio (IHF)
Mono/Stereo .......................... 76 dB/70 dB
Harmonic Distortion (1 kHz)
Mono/Stereo ................................ 0.2/0.3%
Stereo Separation (1 kHz) ................. 45 dB
Frequency Response
..................... 20 Hz to 15 kHz, +0.5/–2 dB
AM SECTION
Tuning Range
[U.S.A. and Canada models]
........................................ 530 to 1,710 kHz
[Australia model] ............ 531 to 1,611 kHz
Usable Sensitivity ....................... 300 µV/m
GENERAL
Power Supply
[U.S.A. and Canada models]
......................................... AC 120V, 60 Hz
[Australia model] ............. AC 240V, 50 Hz
Power Consumption
[U.S.A. model] .................................. 260W
[Canada model] ................................. 210W
[Australia model] .............................. 200W
Standby Power Consumption
[U.S.A. and Canada models] ............. 0.9W
[Australia model] ............................... 1.0W
AC Outlets
2 SWITCHED OUTLETS
[U.S.A. and Canada models]
......................................... 100W max. total
1 SWITCHED OUTLET
[Australia model] ............. 100W max. total
Dimensions (W x H x D)
............................... 435 x 151 x 390.3 mm
(17-1/8” x 5-15/16” x 15-3/8”)
Weight ...................... 9.8 kg (20 lbs. 14 oz.)
Specifications are subject to change without
notice.
Remote control transmitter
The remote control transmitter does not work.
Others
The sound is degraded when listening with the
headphones connected to the compact disc
player or cassette deck that is connected with
this unit.
Direct sunlight or lighting (of an inverter type of
fluorescent lamp etc.) is striking the remote control
sensor of the main unit.
The batteries of this remote control transmitter are
too weak.
This unit is in the standby mode.
Change the position of the main unit.
Replace the batteries with new ones.
Turn the power to this unit on.