1
Select the source to be recorded.
.
*
To dub from tape to tape, refer to the “Notes” shown at
right.
*
When selecting AUX, TUNER, CD or PHONO, be sure
that TAPE 1 and/or TAPE 2 are not also selected.
2
Play the source and then turn the VOLUME control up
to confirm the input source. (For detailed information
on the tuning operations, refer to the page 10.)
3
Set the tape deck in the recording mode.
4
To monitor the audio signals being recorded, press the
input selector button for the tape deck being used to
make the recording.
8
SOURCE
Tape deck connected to
the TAPE 2 terminals.
RECORDER
Tape deck connected to
the TAPE 1 terminals.
Notes
●
VOLUME, BASS, TREBLE, BALANCE and LOUDNESS
control settings have no effect on the material being
recorded.
●
To dub from tape to tape, only the following one way of
dubbing can be performed.
TO RECORD A SOURCE TO TAPE
→
INPUT
TAPE 2
TAPE 1
AUX
TUNER
CD
PHONO
MONITOR
COPY
INPUT
TAPE 2
TAPE 1
AUX
TUNER
CD
PHONO
COPY
MONITOR
1,4
2
