![background image](http://html.mh-extra.com/html/yamaha/rs7000-ver-1-2/rs7000-ver-1-2_service-manual_899788047.webp)
RS7000
47
2. LCD, LED blink
Visually confirm that the LCD is inverted (black/white) at intervals
of approximately 0.5 seconds, and that all LEDs light / go dark.
Also confirm that the LCD backlight is lit, and that contrast of
the LCD can be adjusted by moving the [CONTRAST] knob.
Press the [EXIT] button to end the test, and allow another test
item to be selected.
3. LED
After the LCD screen shown below, the LEDs will light at intervals
of approximately 0.3 seconds. Visually confirm that all LEDs
are operating correctly and that their brightness is consistent.
* The LED check will occur in the following order.
(EFFECT ON/OFF), (LOOP REMIX), (SAMP EDIT),
(STANDBY), (MIDI IN), (MIDI OUT A), (MIDI OUT B),
//// RS7000 Test Program ////
02:LCD,LED
:Press [ENTER]
[-1] [+1]
//// RS7000 Test Program ////
03:LED
:Press [ENTER]
[-1] [+1]
(<SELECT 1>), (<SELECT 2>), (<SINE>), (<TRI>), (<SAW>),
(<PULSE>), (USER S&H), (USER PGM), (AMP), (FILTER),
(PITCH), (FINGERD), (FULL TIME), (OFF), (LPF24), (LPF18),
(LPF12), (HPF), (BPF), (BEF), (F1), (F2), (F3), (F4), (REC),
(PLAY), (PATTERN), (PATT CHAIN), (SONG), (UTILITY),
(KEYBOARD), (ARPEGGIO ON), (MUTE MEMORY),
(SCENE MEMORY), (A), (B), (C), (D), (E), (F), (G), (H), (I),
(J), (MUTE), (1), (2), (3), (4), (5), (6), (7), (8), (9), (10), (11),
(12), (13), (14), (15), (16), (7SEG 1A), (7SEG 1B), (7SEG 1C),
(7SEG 1D), (7SEG 1E), (7SEG 1F), (7SEG 1G), (7SEG1DT),
(7SEG 2A), (7SEG 2B), (7SEG 2C), (7SEG 2D), (7SEG 2E),
(7SEG 2F), (7SEG 2G), (7SEG2DT), (7SEG 3A), (7SEG 3B),
(7SEG 3C), (7SEG 3D), (7SEG 3E), (7SEG 3F), (7SEG 3G),
(7SEG3DT), (7SEG 4A), (7SEG 4B), (7SEG 4C), (7SEG 4D),
(7SEG 4E), (7SEG 4F), (7SEG 4G), (7SEG4DT),
After the last LED goes dark, all LEDs will light.
While the LEDs are being lit, a sine wave will be output.
Press the [EXIT] button to end the test, and allow another test
item to be selected.
4. Panel switch, rotary switch
This test verifies that the panel switches and rotary switches
are functioning correctly.
(Test method)
Turn all switches of the RS7000 on/off according to the LCD
screen shown below.
For the rotary switches, turn each one from the far left toward
the far right, one position at a time.
* The order of the switch check is as follows.
[EFFECT ON/OFF]
8 positions of the rotary switch: [ISOLATION], [D-FILTER],
[CTRL DELAY], [MULTI COMP], [RING MOD], [V-DIST], [LO-
FI], [SLICE]
//// RS7000 Test Program ////
04:Panel SW
:Press [ENTER]
[-1] [+1]
//// RS7000 Test Program ////
03:LED :Checking (xxxxxxx)
xxxxxxx : LED Name
NG
//// RS7000 Test Program ////
01:Battery
:Low NG
1.2v
[-1] [+1]
//// RS7000 Test Program ////
01:Battery
:Hi NG
4.2v
[-1] [+1]
//// RS7000 Test Program ////
04:Panel SW
:Press [xxxxxxx]
xxxxxxx : Switch Name
Содержание RS7000 Ver.1.2
