INSTRUMENT AND CONTROL FUNCTIONS
3-17
3
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
Does the engine start?
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
Does the engine start?
The system is OK.
The motorcycle can be ridden.
This check is most reliable if performed with
a warmed-up engine.
The neutral switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The sidestand switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
The clutch switch may be defective.
The motorcycle should not be ridden
until
checked by a Yamaha dealer.
YES
NO
YES
NO
YES
NO
NOTE:
U5VN11E0.book Page 17 Tuesday, April 13, 2004 5:24 PM
Содержание ROAD STAN XV17AC
Страница 1: ...5VN 28199 11 LIT 11626 18 15 XV17AT C XV17AWT C XV17AMT C XV17ATT C XV17ATMT C OWNER S MANUAL ...
Страница 2: ...EAU10041 U5VN11E0 book Page 1 Tuesday April 13 2004 5 24 PM ...
Страница 100: ...CONSUMER INFORMATION 9 8 9 U5VN11E0 book Page 8 Tuesday April 13 2004 5 24 PM ...
Страница 105: ...PRINTED IN JAPAN 2004 04 1 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...