INSTRUMENT AND CONTROL FUNCTIONS
3-11
3
EAU14320
Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-10.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
WARNING
EWA10160
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
EAU14580
Windshield
[XV17AT(C)/XV17ATM(C)]
To suit the rider’s preference, the wind-
shield angle can be adjusted and the
height can be changed to one of two
positions.
To adjust the windshield angle
1. Loosen the bolts on each side of
the windshield.
2. Move the windshield to the desired
angle.
3. Tighten the bolts to the specified
torque.
1. Helmet holder
1. Windshield
2. Bolt
U5VN11E0.book Page 11 Tuesday, April 13, 2004 5:24 PM
Содержание ROAD STAN XV17AC
Страница 1: ...5VN 28199 11 LIT 11626 18 15 XV17AT C XV17AWT C XV17AMT C XV17ATT C XV17ATMT C OWNER S MANUAL ...
Страница 2: ...EAU10041 U5VN11E0 book Page 1 Tuesday April 13 2004 5 24 PM ...
Страница 100: ...CONSUMER INFORMATION 9 8 9 U5VN11E0 book Page 8 Tuesday April 13 2004 5 24 PM ...
Страница 105: ...PRINTED IN JAPAN 2004 04 1 3 1 CR E PRINTED ON RECYCLED PAPER YAMAHA MOTOR CO LTD ...