6
Channel Number:
The options for the <Channel Number> portion of the serial strings are 1-8 for an
Executive Elite 8, and 1-4 for an Executive Elite 4 system, since each Base station can
only control up to 8 or 4 microphones, respectively. The <Channel Number>
corresponds to the channel number the microphone is paired to in the Executive Elite.
A <Channel Number> of “A” will control all microphones.
Examples:
The following string would set microphone channel 3 to be the chairman microphone
for its mute group:
Command:
set chairmanmic ch 3 1
Return:
val chairmanmic ch 3 1
The following strings would turn off all microphones on the Elite:
Command:
shutdownmic ch A
Return:
val shutdownmic ch A
The following strings would retrieve the battery status of microphone 5 @ 98%:
Command:
get batterystatus ch 5
Return:
val batterystatus ch 5 98
Legacy Command Strings
Legacy Commands that were used in the Executive HD have been maintained in the
Executive Elite, to allow for Room Control programming using the Executive HD
module to be used with Executive Elites. These commands are listed below in the
legacy commands section of the tables.
The Command Interface of the Executive Elite has been expanded significantly with
additional and new functionality. These new commands will not work with Revolabs
Executive HD systems.
