manualshive.com logo in svg

Yamaha RAPTOR YFM80RW, Руководство пользователя, Страница: 43 / 133

Поделиться
Скачать
Yamaha RAPTOR YFM80RW Скачать руководство пользователя страница 43

 

6-4

 

1

2

3

4

5

6

7

8

9

10

11

 

EBU20600

 

To start out and accelerate

 

1. Release the throttle lever.

CAUTION:

 

ECB00200 

 

Always close the throttle before shifting gears,
otherwise damage to the engine and drive train

 

may result.

 

2. Shift into first gear and release the shift pedal.
3. Open the throttle gradually.
4. Once the ATV has attained adequate speed,

release the throttle lever.

5. Shift into second gear and release the shift

pedal.

6. Open the throttle gradually.
7. Follow the same procedure when shifting to

the next higher gear.

 

EWB00690 

EBU20640

 

To decelerate

 

When slowing down or stopping, release the throt-
tle and apply the brakes smoothly and evenly. As
you slow down, shift to a lower gear. Be sure that
the engine has sufficiently slowed before engaging
a lower gear. Improper use of the brakes or shifting
can cause the tires to lose traction, reducing con-
trol and increasing the possibility of an accident.

 

EWB00650 

WARNING

 

POTENTIAL HAZARD
Opening the throttle before releasing the
shift pedal.
WHAT CAN HAPPEN
The ATV could wheelie. This would increase
the chance of an accident, including over-
turn.

HOW TO AVOID THE HAZARD
Release the shift pedal before opening the
throttle. Open the throttle gradually.

WARNING

 

POTENTIAL HAZARD
Engaging a lower gear when the engine
speed is too high.
WHAT CAN HAPPEN
The wheels could stop rotating and lose trac-
tion. This could cause loss of control, an ac-
cident and injury. It could also cause engine
or drive train damage.
HOW TO AVOID THE HAZARD
Make sure the engine has sufficiently slowed
before shifting to a lower gear.

Содержание RAPTOR YFM80RW






































































































































Отзывы:

Нет отзывов