manualshive.com logo in svg

Yamaha Raptor 700R YFM70RSPX, Руководство пользователя

Поделиться
Скачать
Yamaha Raptor 700R YFM70RSPX Скачать руководство пользователя страница 132

 

8-45

 

1

2

3

4

5

6

7

8

9

10

11

CAUTION:

 

ECB00650 

 

Do not touch the glass part of the headlight
bulb to keep it free from oil, otherwise the
transparency of the glass, the luminosity of the
bulb, and the bulb life will be adversely affect-
ed. Thoroughly clean off any dirt and finger-
prints on the headlight bulb using a cloth

 

moistened with alcohol or thinner.

 

6. Install the headlight bulb holder by pushing it

in and turning it clockwise.

7. Install the headlight bulb holder cover.

8. Connect the headlight coupler.
9. Install the headlight unit by installing the bolts.

10. Adjust the headlight beam if necessary.

 

EBU25560

 

Adjusting a headlight beam 

CAUTION:

 

ECB00690 

 

It is advisable to have a Yamaha dealer make

 

this adjustment.

 

To raise a headlight beam, turn the adjusting bolt
in direction (a).
To lower a headlight beam, turn the adjusting bolt
in direction (b).

 

1.  Do not touch the glass part of the bulb.

 

1.  Headlight beam adjusting bolt

1

(a)

(b)

Содержание Raptor 700R YFM70RSPX































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды